Suggestion box: Difference between revisions

From LabNation Wiki
Jump to navigation Jump to search
mNo edit summary
mNo edit summary
Line 3: Line 3:
! Suggestion (software)
! Suggestion (software)
! Origin
! Origin
|-
| Save to JSON format || [https://www.lab-nation.com/forum/software/topics/recording-i2c-or-any-other-decoded-logic-signals]
|-
| Select which channels to save to file || [https://www.lab-nation.com/forum/software/topics/recording-i2c-or-any-other-decoded-logic-signals]
|-
|-
| Beep on trigger || [https://www.lab-nation.com/forum/smartscope-api/topics/trigger-beep]
| Beep on trigger || [https://www.lab-nation.com/forum/smartscope-api/topics/trigger-beep]

Revision as of 10:32, 27 April 2018

Suggestions

Suggestion (software) Origin
Save to JSON format [1]
Select which channels to save to file [2]
Beep on trigger [3]
Measurements also applicable to Math/Operator waves [4]
FFT only on viewport (subsection of panorama) [5]
High-resolution multimeter mode (by changing offset voltage) [6]
Data logger functionality [7]
Possibility to switch off peak detect Vainney
Average instead of peak detect Vainney
Numpad: highlight value instead of removing it Ger
Documentation on USB protocol sigrok
After fetching RAM data: also update Panorama sigrok
Remove sliders and replace by numpads Karsten
Show preview of AWG function to upload Karsten
Save - replay functionality Robert
Frequency response tool [8]
Android keyboard support [9]
In-app decoder output listing [10]
On adding decoder: suggest to switch to require trigger or single trigger mode [11]
Cursors in FFT window. [12][13]
Record digital waveforms and reproduce them using digi-out [14]
Mac users - keyboard and mouse [15]
possibility to give a name to the channels like "CLK, status, CE_N, ..." [16]
digi trigger through context menu [17]
Re-arrange AWG menu [18]
Display measurements for digiwaves [19]
AWG defaulted to a DC offset of 0V, 3V P-P, and 1kHz so it can be used for probe comp [20]
Ensure lowest CPU consumption when acquisition is stopped [21]
Changing Colors for each channel would be a nice feature as well. [22][23]
what if we could customise the colours of grid, channels and background? [24]
ability to load the saved CSV and MAT files and view the waveform on the Smartscope GUI, so we can zoom in and out to the voltage and time scale [25]
highlight the actual points taken (digitized) on the display waveform [26]
scroll on the mouse to cycle through the logic analyser trigger condition [27]
Hover+scroll wheel changes trigger options [28]
Android touch button equiv of page up/dn and home end: [29]
AWG takes HEX values rather than voltages [30]
Digital output linked to AWG waveform [31]
a package for the Raspberry Pi 2 running the default raspberry pi 2 Linux distribution [32]
convert Operator wave into reference wave [33]
Show AC/DC and trigger edge in bubble (same as x10) [34]
ability to turn off mousewheel [35]
ping-pong memory architecture [36]
duplex 4wire SPI output [37]
mode: fix trigger position [38]
measurement: low and high period time [Mail Tom]
trigger counter [39]
Suggestion (hardware) Origin
How about a nice fabric bag with a zipper, or better yet a clear one [40]

Suggestions which helped improving our app!

Suggestion Origin
Save decoder configuration [41]
Save and recall entire configuration [42]
save LA settings (trigger condition, arrangement of the channe) [43]
Support for current probes [44]
Support for 20x attenuators Vainney
Edge counter between cursors Vainney
save settings every minute or so [45]
X-Y mode [46]
Reference waveform [47]
I2C decoder: show W/R in address block Yentel
Need better FFT pan/zoom support [48]
Get that External trigger pin going [49]
xth pulse triggering, pulse width triggering [50]
independent analog channel triggering [51]
time based triggering to analog channels [52]
More complex trigger (hf reject etc) [53]
save contents of RAM to disk [54]
itd be nice if there was a record setting for just one screens worth. [55]
select max outliers to display on grid while subsampling on fpga [56]
"persistence" mode that would superimpose a number of traces on top of each other [57]
extend decoders so they can generate a new waveform [58]
Improve cursor contrast [59]
Utra hi speed mode, trace acumulation, persistance [60]
Option to invert analogwaves/digiwaves [61] [62]
Make analog indicators docable the same way as the digital indicators are [63]
Make height of indivisual graphs adjustable by dragging center bar [64]
Option to 'unpower' AWG in analog mode [65]
Sliders: numeric pad for exact value input [66]
Show deltas of last 2 vertical and last 2 horizontal cursors [67]
flash single/require trigger while not receiving data
there would be value in having a "Power OK" light or indication, even if it's back through software, that acceptable power is present. [68]
allow 10ns/div [69]
key auto-repeat [70]
Right click or long press sets trigger to left 10% position [71]
UART decoder [72]
semi-automatic time measurement feature [73]
Would be nice to turn off channels not being used in the LA. [74]
Sample on how to control digital outputs from Matlab Jacobus
Individual pins can't be hidden (as in o-scope) giving no screen space for the bus itself [75]

Suggestions we believed didn't really fit in our idea of a perfect SmartScope

Suggestion Origin
Scaling: window popup with the "canonical" time base or volt per division value [76]
scroll causes voltage zoom, shift-scroll for time-zoom (opposite of today) [77]