Suggestion box: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
m (→Suggestions) |
||
(87 intermediate revisions by the same user not shown) | |||
Line 1: | Line 1: | ||
=Suggestions= | |||
{| class="wikitable" | |||
! Suggestion (software) | |||
! Origin | |||
|- | |||
| Add pass-fail mask || [https://www.lab-nation.com/forum/software/topics/feature-request-pass-fail-wondow-for-testing-setups] | |||
|- | |||
| Separate size control for numbers on the grid || [https://www.lab-nation.com/forum/software/topics/readibilty-of-minus-signs-on-y-axis?page=1] | |||
|- | |||
| Don't switch to dummy scope when USB disconnected || [https://www.lab-nation.com/forum/software/topics/don-t-switch-to-dummy-scope-when-usb-disconnected] | |||
|- | |||
| Save to JSON format || [https://www.lab-nation.com/forum/software/topics/recording-i2c-or-any-other-decoded-logic-signals] | |||
|- | |||
| Select which channels to save to file || [https://www.lab-nation.com/forum/software/topics/recording-i2c-or-any-other-decoded-logic-signals] | |||
|- | |||
| Beep on trigger || [https://www.lab-nation.com/forum/smartscope-api/topics/trigger-beep] | |||
|- | |||
| Don't auto-change to Rolling mode || [https://www.lab-nation.com/forum/software/topics/stay-on-auto-triggering-while-switching-to-timebase-beyond-20ms-div] | |||
|- | |||
| Measurements also applicable to Math/Operator waves || [https://www.lab-nation.com/forum/software/topics/applying-measurements-of-math-graphs/posts/new?reply_to_id=3511] | |||
|- | |||
| FFT only on viewport (subsection of panorama) || [https://www.lab-nation.com/forum/software/topics/fft-display] | |||
|- | |||
| High-resolution multimeter mode (by changing offset voltage) || [https://www.lab-nation.com/forum/hardware/topics/measuring-resolution?page=1] | |||
|- | |||
| Data logger functionality || [https://www.lab-nation.com/forum/smartscope-api/topics/voltage-data-logger?page=1] | |||
|- | |||
| Possibility to switch off peak detect || Vainney | |||
|- | |||
| Average instead of peak detect || Vainney | |||
|- | |||
| Numpad: highlight value instead of removing it || Ger | |||
|- | |||
| Documentation on USB protocol || sigrok | |||
|- | |||
| After fetching RAM data: also update Panorama || sigrok | |||
|- | |||
| Remove sliders and replace by numpads || Karsten | |||
|- | |||
| Show preview of AWG function to upload || Karsten | |||
|- | |||
| Save - replay functionality || Robert | |||
|- | |||
| Add ESC button to keyboard || Harry | |||
|- | |||
| high-time, low-time measurement || Seb | |||
|- | |||
| Frequency response tool || [https://www.lab-nation.com/forum/software/topics/new-feature-suggestion-frequency-response-tool?page=1] | |||
|- | |||
| Android keyboard support || [https://www.lab-nation.com/forum/software/topics/smartscope-and-odroid?page=1] | |||
|- | |||
| In-app decoder output listing || [https://www.lab-nation.com/forum/software/topics/suggestions-decoder-trigger-mode-and-data-listing/posts/new?reply_to_id=1891] | |||
|- | |||
| On adding decoder: suggest to switch to require trigger or single trigger mode || [https://www.lab-nation.com/forum/software/topics/i-c-decoder-doesn-t-decode-when-it-samples-below-50mhz/posts/new?reply_to_id=1986] | |||
|- | |||
| Cursors in FFT window. || [https://www.lab-nation.com/forum/software/topics/version-2015-1001-0-50-linux-issue-wishes?page=1][https://www.lab-nation.com/forum/software/topics/using-the-fft-graph?page=1] | |||
|- | |||
| Record digital waveforms and reproduce them using digi-out || [https://www.lab-nation.com/forum/software/topics/logic-analyzer-like-saleae] | |||
|- | |||
| Mac users - keyboard and mouse || [https://www.lab-nation.com/forum/software/topics/mac-users-keyboard-and-mouse?page=1] | |||
|- | |||
| possibility to give a name to the channels like "CLK, status, CE_N, ..." || [https://www.lab-nation.com/forum/software/topics/questions-and-suggestions-to-the-logic-analyzer/posts/new?reply_to_id=1794] | |||
|- | |||
| digi trigger through context menu || [https://www.lab-nation.com/forum/software/topics/questions-and-suggestions-to-the-logic-analyzer/posts/new?reply_to_id=1794] | |||
|- | |||
| Re-arrange AWG menu || [https://www.lab-nation.com/forum/software/topics/turn-on-off-awg] | |||
|- | |||
| Display measurements for digiwaves || [https://www.lab-nation.com/forum/software/topics/math-decoders-issues-bugs] | |||
|- | |||
| AWG defaulted to a DC offset of 0V, 3V P-P, and 1kHz so it can be used for probe comp || [https://www.lab-nation.com/forum/software/topics/2015-1002-10-58-mac-os-x-numpad-is-transparent?page=1] | |||
|- | |||
| Ensure lowest CPU consumption when acquisition is stopped || [https://www.lab-nation.com/forum/software/topics/smartscope-sw-draws-a-lot-of-current-power-on-an-android-device-even-when-not-in-use/posts/new?reply_to_id=1733] | |||
|- | |||
| Changing Colors for each channel would be a nice feature as well. || [https://www.lab-nation.com/forum/software/topics/mac-os-crashes-ui-suggestions/posts/new?reply_to_id=682][https://www.lab-nation.com/forum/software/topics/how-do-we-adjust-vert-sensitivity-in-the-linux-version/posts/new?reply_to_id=738][https://www.lab-nation.com/forum/software/topics/change-trace-colors-for-high-contrast-prints] | |||
|- | |||
| what if we could customise the colours of grid, channels and background? || [https://www.lab-nation.com/forum/hardware/topics/questions-and-suggestions/posts/new?reply_to_id=791] | |||
|- | |||
| ability to load the saved CSV and MAT files and view the waveform on the Smartscope GUI, so we can zoom in and out to the voltage and time scale || [https://www.lab-nation.com/forum/hardware/topics/questions-and-suggestions/posts/new?reply_to_id=791] | |||
|- | |||
| highlight the actual points taken (digitized) on the display waveform || [https://www.lab-nation.com/forum/hardware/topics/point-enhancement-mode] | |||
|- | |||
| scroll on the mouse to cycle through the logic analyser trigger condition|| [https://www.lab-nation.com/forum/software/topics/new-user-questions-and-maybe-suggestions?page=1] | |||
|- | |||
| Hover+scroll wheel changes trigger options|| [https://www.lab-nation.com/forum/software/topics/a-long-list-of-software-suggestions] | |||
|- | |||
| Android touch button equiv of page up/dn and home end:|| [https://www.lab-nation.com/forum/software/topics/a-long-list-of-software-suggestions] | |||
|- | |||
| AWG takes HEX values rather than voltages|| [https://www.lab-nation.com/forum/software/topics/a-long-list-of-software-suggestions] | |||
|- | |||
| Digital output linked to AWG waveform|| [https://www.lab-nation.com/forum/software/topics/a-long-list-of-software-suggestions] | |||
|- | |||
| a package for the Raspberry Pi 2 running the default raspberry pi 2 Linux distribution|| [https://www.lab-nation.com/forum/software/topics/raspberry-pi-2-support/posts/new?reply_to_id=1273] | |||
|- | |||
| convert Operator wave into reference wave || [https://www.lab-nation.com/forum/software/topics/peak-detect-switch-on-and-off] | |||
|- | |||
| Show AC/DC and trigger edge in bubble (same as x10) || [https://www.lab-nation.com/forum/software/topics/a-long-list-of-software-suggestions/posts/new?reply_to_id=1388] | |||
|- | |||
| ability to turn off mousewheel || [https://www.lab-nation.com/forum/software/topics/einstellung-per-mausrad] | |||
|- | |||
| ping-pong memory architecture || [https://www.lab-nation.com/forum/software/topics/panorama-shows-waveform-main-window-shows-nothing] | |||
|- | |||
| duplex 4wire SPI output || [https://www.lab-nation.com/forum/software/topics/decoder-4-wire-spi?page=1] | |||
|- | |||
| mode: fix trigger position || [https://www.lab-nation.com/forum/software/topics/feature-suggestion-fixed-trigger-position?page=1] | |||
|- | |||
| measurement: low and high period time || [Mail Tom] | |||
|- | |||
| trigger counter || [https://www.lab-nation.com/forum/software/topics/triggering-seriously-needs-improvement-in-features?page=1] | |||
|} | |||
{| class="wikitable" | |||
! Suggestion (hardware) | |||
! Origin | |||
|- | |||
| How about a nice fabric bag with a zipper, or better yet a clear one || [https://www.lab-nation.com/forum/hardware/topics/recommendations/posts/new?reply_to_id=1751] | |||
|} | |||
=Suggestions which helped improving our app!= | |||
{| class="wikitable" | {| class="wikitable" | ||
! Suggestion | ! Suggestion | ||
! Origin | ! Origin | ||
|- | |- | ||
| | | Save decoder configuration || [https://www.lab-nation.com/forum/software/topics/suggestion-protocol-decoder-save-settings] | ||
|- | |||
| Save and recall entire configuration || [https://www.lab-nation.com/forum/software/topics/suggestion-protocol-decoder-save-settings] | |||
|- | |||
| save LA settings (trigger condition, arrangement of the channe) || [https://www.lab-nation.com/forum/software/topics/questions-and-suggestions-to-the-logic-analyzer/posts/new?reply_to_id=1794] | |||
|- | |||
| Support for current probes || [https://www.lab-nation.com/forum/software/topics/when-are-you-going-to-add-presets-for-inductive-amp-clamps-into-the-probe-selection-menu] | |||
|- | |||
| Support for 20x attenuators || Vainney | |||
|- | |||
| Edge counter between cursors || Vainney | |||
|- | |- | ||
| | | save settings every minute or so || [https://www.lab-nation.com/forum/software/topics/software-state-storage?page=1] | ||
|- | |- | ||
| X-Y mode || [https://www.lab-nation.com/forum/hardware/topics/does-it-support-xy-mode] | | X-Y mode || [https://www.lab-nation.com/forum/hardware/topics/does-it-support-xy-mode] | ||
|- | |- | ||
| | | Reference waveform || [https://www.lab-nation.com/forum/software/topics/display-reference-waveform?page=1] | ||
|- | |||
| I2C decoder: show W/R in address block || Yentel | |||
|- | |||
| Need better FFT pan/zoom support || [https://www.lab-nation.com/forum/software/topics/using-the-fft-graph] | |||
|- | |||
| Get that External trigger pin going || [https://www.lab-nation.com/forum/hardware/topics/external-trigger] | |||
|- | |||
| xth pulse triggering, pulse width triggering || [https://www.lab-nation.com/forum/software/topics/trigger-every-2nd-or-3rd-pulse?page=1] | |||
|- | |||
| independent analog channel triggering || [https://www.lab-nation.com/forum/hardware/topics/questions-and-suggestions/posts/new?reply_to_id=821] | |||
|- | |||
| time based triggering to analog channels || [https://www.lab-nation.com/forum/hardware/topics/questions-and-suggestions?page=1] | |||
|- | |||
| More complex trigger (hf reject etc)|| [https://www.lab-nation.com/forum/software/topics/a-long-list-of-software-suggestions] | |||
|- | |||
| save contents of RAM to disk || [https://www.lab-nation.com/forum/hardware/topics/how-to-acquire-long-data-set?page=1] | |||
|- | |||
| itd be nice if there was a record setting for just one screens worth. || [https://www.lab-nation.com/forum/software/topics/how-do-we-adjust-vert-sensitivity-in-the-linux-version/posts/new?reply_to_id=738] | |||
|- | |||
| select max outliers to display on grid while subsampling on fpga|| [https://www.lab-nation.com/forum/software/topics/redraw-effect-when-stopping] | |||
|- | |||
| "persistence" mode that would superimpose a number of traces on top of each other|| [https://www.lab-nation.com/forum/software/topics/feature-suggestion] | |||
|- | |||
| extend decoders so they can generate a new waveform || [https://www.lab-nation.com/forum/software/topics/custom-math?page=1] | |||
|- | |||
| Improve cursor contrast || [https://www.lab-nation.com/forum/software/topics/cursors-are-hardly-visible?page=1] | |||
|- | |||
| Utra hi speed mode, trace acumulation, persistance|| [https://www.lab-nation.com/forum/software/topics/a-long-list-of-software-suggestions] | |||
|- | |||
| Option to invert analogwaves/digiwaves|| [https://www.lab-nation.com/forum/software/topics/math-decoders-issues-bugs] [https://www.lab-nation.com/forum/software/topics/option-to-invert-trace] | |||
|- | |||
| Make analog indicators docable the same way as the digital indicators are || [https://www.lab-nation.com/forum/software/topics/math-decoders-issues-bugs] | |||
|- | |||
| Make height of indivisual graphs adjustable by dragging center bar || [https://www.lab-nation.com/forum/smartscope-api/topics/some-wishes-to-smartscope] | |||
|- | |||
| Option to 'unpower' AWG in analog mode|| [https://www.lab-nation.com/forum/software/topics/turn-on-off-awg?page=1] | |||
|- | |||
| Sliders: numeric pad for exact value input || [https://www.lab-nation.com/forum/software/topics/software-comments] | |||
|- | |- | ||
| Show deltas of last 2 vertical and last 2 horizontal cursors || [https://www.lab-nation.com/forum/software/topics/cursor-time-voltage-delta-measurement-in-scope-mode?page=1] | | Show deltas of last 2 vertical and last 2 horizontal cursors || [https://www.lab-nation.com/forum/software/topics/cursor-time-voltage-delta-measurement-in-scope-mode?page=1] | ||
|- | |||
| flash single/require trigger while not receiving data || | |||
|- | |||
| there would be value in having a "Power OK" light or indication, even if it's back through software, that acceptable power is present. || [https://www.lab-nation.com/forum/hardware/topics/question-about-power-supplying-to-smartscope-and-android-tablet] | |||
|- | |||
| allow 10ns/div || [https://www.lab-nation.com/forum/software/topics/my-first-run-experiences-cb30bb0f-ac41-4848-a6db-cdd53867a022/posts/new?reply_to_id=826] | |||
|- | |||
| key auto-repeat || [https://www.lab-nation.com/forum/software/topics/my-first-run-experiences-cb30bb0f-ac41-4848-a6db-cdd53867a022/posts/new?reply_to_id=826] | |||
|- | |||
| Right click or long press sets trigger to left 10% position || [https://www.lab-nation.com/forum/software/topics/a-long-list-of-software-suggestions] | |||
|- | |||
| UART decoder|| [https://www.lab-nation.com/forum/software/topics/a-long-list-of-software-suggestions] | |||
|- | |||
| semi-automatic time measurement feature|| [https://www.lab-nation.com/forum/software/topics/logic-analyzer-time-measurement?page=1] | |||
|- | |- | ||
| Would be nice to turn off channels not being used in the LA. || [https://www.lab-nation.com/forum/software/topics/mac-os-crashes-ui-suggestions/posts/new?reply_to_id=682] | | Would be nice to turn off channels not being used in the LA. || [https://www.lab-nation.com/forum/software/topics/mac-os-crashes-ui-suggestions/posts/new?reply_to_id=682] | ||
|- | |- | ||
| | | Sample on how to control digital outputs from Matlab || Jacobus | ||
| | |||
| | |||
|- | |- | ||
| Individual pins can't be hidden (as in o-scope) giving no screen space for the bus itself || [https://www.lab-nation.com/forum/software/topics/viewing-issues-using-logic-analyzer-as-a-bus/posts/new?reply_to_id=746] | | Individual pins can't be hidden (as in o-scope) giving no screen space for the bus itself || [https://www.lab-nation.com/forum/software/topics/viewing-issues-using-logic-analyzer-as-a-bus/posts/new?reply_to_id=746] | ||
|- | |- | ||
| | |} | ||
=Suggestions we believed didn't really fit in our idea of a perfect SmartScope= | |||
{| class="wikitable" | |||
! Suggestion | |||
! Origin | |||
|- | |||
| Scaling: window popup with the "canonical" time base or volt per division value || [https://www.lab-nation.com/forum/software/topics/software-comments] | |||
|- | |||
| scroll causes voltage zoom, shift-scroll for time-zoom (opposite of today)|| [https://www.lab-nation.com/forum/software/topics/software-comments] | |||
|- | |||
|} | |} |
Latest revision as of 18:52, 3 April 2019
Suggestions
Suggestion (software) | Origin |
---|---|
Add pass-fail mask | [1] |
Separate size control for numbers on the grid | [2] |
Don't switch to dummy scope when USB disconnected | [3] |
Save to JSON format | [4] |
Select which channels to save to file | [5] |
Beep on trigger | [6] |
Don't auto-change to Rolling mode | [7] |
Measurements also applicable to Math/Operator waves | [8] |
FFT only on viewport (subsection of panorama) | [9] |
High-resolution multimeter mode (by changing offset voltage) | [10] |
Data logger functionality | [11] |
Possibility to switch off peak detect | Vainney |
Average instead of peak detect | Vainney |
Numpad: highlight value instead of removing it | Ger |
Documentation on USB protocol | sigrok |
After fetching RAM data: also update Panorama | sigrok |
Remove sliders and replace by numpads | Karsten |
Show preview of AWG function to upload | Karsten |
Save - replay functionality | Robert |
Add ESC button to keyboard | Harry |
high-time, low-time measurement | Seb |
Frequency response tool | [12] |
Android keyboard support | [13] |
In-app decoder output listing | [14] |
On adding decoder: suggest to switch to require trigger or single trigger mode | [15] |
Cursors in FFT window. | [16][17] |
Record digital waveforms and reproduce them using digi-out | [18] |
Mac users - keyboard and mouse | [19] |
possibility to give a name to the channels like "CLK, status, CE_N, ..." | [20] |
digi trigger through context menu | [21] |
Re-arrange AWG menu | [22] |
Display measurements for digiwaves | [23] |
AWG defaulted to a DC offset of 0V, 3V P-P, and 1kHz so it can be used for probe comp | [24] |
Ensure lowest CPU consumption when acquisition is stopped | [25] |
Changing Colors for each channel would be a nice feature as well. | [26][27][28] |
what if we could customise the colours of grid, channels and background? | [29] |
ability to load the saved CSV and MAT files and view the waveform on the Smartscope GUI, so we can zoom in and out to the voltage and time scale | [30] |
highlight the actual points taken (digitized) on the display waveform | [31] |
scroll on the mouse to cycle through the logic analyser trigger condition | [32] |
Hover+scroll wheel changes trigger options | [33] |
Android touch button equiv of page up/dn and home end: | [34] |
AWG takes HEX values rather than voltages | [35] |
Digital output linked to AWG waveform | [36] |
a package for the Raspberry Pi 2 running the default raspberry pi 2 Linux distribution | [37] |
convert Operator wave into reference wave | [38] |
Show AC/DC and trigger edge in bubble (same as x10) | [39] |
ability to turn off mousewheel | [40] |
ping-pong memory architecture | [41] |
duplex 4wire SPI output | [42] |
mode: fix trigger position | [43] |
measurement: low and high period time | [Mail Tom] |
trigger counter | [44] |
Suggestion (hardware) | Origin |
---|---|
How about a nice fabric bag with a zipper, or better yet a clear one | [45] |
Suggestions which helped improving our app!
Suggestion | Origin |
---|---|
Save decoder configuration | [46] |
Save and recall entire configuration | [47] |
save LA settings (trigger condition, arrangement of the channe) | [48] |
Support for current probes | [49] |
Support for 20x attenuators | Vainney |
Edge counter between cursors | Vainney |
save settings every minute or so | [50] |
X-Y mode | [51] |
Reference waveform | [52] |
I2C decoder: show W/R in address block | Yentel |
Need better FFT pan/zoom support | [53] |
Get that External trigger pin going | [54] |
xth pulse triggering, pulse width triggering | [55] |
independent analog channel triggering | [56] |
time based triggering to analog channels | [57] |
More complex trigger (hf reject etc) | [58] |
save contents of RAM to disk | [59] |
itd be nice if there was a record setting for just one screens worth. | [60] |
select max outliers to display on grid while subsampling on fpga | [61] |
"persistence" mode that would superimpose a number of traces on top of each other | [62] |
extend decoders so they can generate a new waveform | [63] |
Improve cursor contrast | [64] |
Utra hi speed mode, trace acumulation, persistance | [65] |
Option to invert analogwaves/digiwaves | [66] [67] |
Make analog indicators docable the same way as the digital indicators are | [68] |
Make height of indivisual graphs adjustable by dragging center bar | [69] |
Option to 'unpower' AWG in analog mode | [70] |
Sliders: numeric pad for exact value input | [71] |
Show deltas of last 2 vertical and last 2 horizontal cursors | [72] |
flash single/require trigger while not receiving data | |
there would be value in having a "Power OK" light or indication, even if it's back through software, that acceptable power is present. | [73] |
allow 10ns/div | [74] |
key auto-repeat | [75] |
Right click or long press sets trigger to left 10% position | [76] |
UART decoder | [77] |
semi-automatic time measurement feature | [78] |
Would be nice to turn off channels not being used in the LA. | [79] |
Sample on how to control digital outputs from Matlab | Jacobus |
Individual pins can't be hidden (as in o-scope) giving no screen space for the bus itself | [80] |
Suggestions we believed didn't really fit in our idea of a perfect SmartScope
Suggestion | Origin |
---|---|
Scaling: window popup with the "canonical" time base or volt per division value | [81] |
scroll causes voltage zoom, shift-scroll for time-zoom (opposite of today) | [82] |