Suggestion box: Difference between revisions

From LabNation Wiki
Jump to navigation Jump to search
Line 81: Line 81:
|-
|-
| ping-pong memory architecture || [https://www.lab-nation.com/forum/software/topics/panorama-shows-waveform-main-window-shows-nothing]
| ping-pong memory architecture || [https://www.lab-nation.com/forum/software/topics/panorama-shows-waveform-main-window-shows-nothing]
|-
| duplex 4wire SPI output || [https://www.lab-nation.com/forum/software/topics/decoder-4-wire-spi?page=1]
|}
|}



Revision as of 08:27, 1 June 2016

Suggestions

Suggestion (software) Origin
Data logger functionality [1]
Edge counter between cursors Vainney
Numpad: highlight value instead of removing it Ger
Documentation on USB protocol sigrok
Save decoder configuration Alfons
I2C decoder: show W/R in address block Yentel
Remove sliders and replace by numpads Karsten
Show preview of AWG function to upload Karsten
Save - replay functionality Robert
Frequency response tool [2]
Android keyboard support [3]
In-app decoder output listing [4]
Reference waveform [5]
On adding decoder: suggest to switch to require trigger or single trigger mode [6]
Cursors in FFT window. [7]
Record digital waveforms and reproduce them using digi-out [8]
Mac users - keyboard and mouse [9]
possibility to give a name to the channels like "CLK, status, CE_N, ..." [10]
digi trigger through context menu [11]
save LA settings (trigger condition, arrangement of the channe) [12]
Re-arrange AWG menu [13]
save settings every minute or so [14]
Display measurements for digiwaves [15]
AWG defaulted to a DC offset of 0V, 3V P-P, and 1kHz so it can be used for probe comp [16]
Ensure lowest CPU consumption when acquisition is stopped [17]
X-Y mode [18]
Changing Colors for each channel would be a nice feature as well. [19][20]
what if we could customise the colours of grid, channels and background? [21]
ability to load the saved CSV and MAT files and view the waveform on the Smartscope GUI, so we can zoom in and out to the voltage and time scale [22]
highlight the actual points taken (digitized) on the display waveform [23]
scroll on the mouse to cycle through the logic analyser trigger condition [24]
Hover+scroll wheel changes trigger options [25]
Android touch button equiv of page up/dn and home end: [26]
AWG takes HEX values rather than voltages [27]
Digital output linked to AWG waveform [28]
a package for the Raspberry Pi 2 running the default raspberry pi 2 Linux distribution [29]
Show AC/DC and trigger edge in bubble (same as x10) [30]
ability to turn off mousewheel [31]
ping-pong memory architecture [32]
duplex 4wire SPI output [33]
Suggestion (hardware) Origin
How about a nice fabric bag with a zipper, or better yet a clear one [34]

Suggestions which helped improving our app!

Suggestion Origin
Get that External trigger pin going [35]
xth pulse triggering, pulse width triggering [36]
independent analog channel triggering [37]
time based triggering to analog channels [38]
More complex trigger (hf reject etc) [39]
save contents of RAM to disk [40]
itd be nice if there was a record setting for just one screens worth. [41]
select max outliers to display on grid while subsampling on fpga [42]
"persistence" mode that would superimpose a number of traces on top of each other [43]
extend decoders so they can generate a new waveform [44]
Improve cursor contrast [45]
Utra hi speed mode, trace acumulation, persistance [46]
Option to invert analogwaves/digiwaves [47] [48]
Make analog indicators docable the same way as the digital indicators are [49]
Make height of indivisual graphs adjustable by dragging center bar [50]
Option to 'unpower' AWG in analog mode [51]
Sliders: numeric pad for exact value input [52]
Show deltas of last 2 vertical and last 2 horizontal cursors [53]
flash single/require trigger while not receiving data
there would be value in having a "Power OK" light or indication, even if it's back through software, that acceptable power is present. [54]
allow 10ns/div [55]
key auto-repeat [56]
Right click or long press sets trigger to left 10% position [57]
UART decoder [58]
semi-automatic time measurement feature [59]
Would be nice to turn off channels not being used in the LA. [60]
Individual pins can't be hidden (as in o-scope) giving no screen space for the bus itself [61]

Suggestions we believed didn't really fit in our idea of a perfect SmartScope

Suggestion Origin
Scaling: window popup with the "canonical" time base or volt per division value [62]
scroll causes voltage zoom, shift-scroll for time-zoom (opposite of today) [63]