Suggestion box

Suggestions

Suggestion (software)	Origin
Data logger functionality	[1]
Edge counter between cursors	Vainney
Sample on how to control digital outputs from Matlab	Jacobus
Numpad: highlight value instead of removing it	Ger
Documentation on USB protocol	sigrok
Save decoder configuration	Alfons
I2C decoder: show W/R in address block	Yentel
Remove sliders and replace by numpads	Karsten
Show preview of AWG function to upload	Karsten
Save - replay functionality	Robert
Frequency response tool	[2]
Android keyboard support	[3]
In-app decoder output listing	[4]
Reference waveform	[5]
On adding decoder: suggest to switch to require trigger or single trigger mode	[6]
Cursors, zooming in FFT window.	[7][8]https://www.lab-nation.com/forum/software/topics/using-the-fft-graph?page=1]
Record digital waveforms and reproduce them using digi-out	[9]
Mac users - keyboard and mouse	[10]
possibility to give a name to the channels like "CLK, status, CE_N, ..."	[11]
digi trigger through context menu	[12]
save LA settings (trigger condition, arrangement of the channe)	[13]
Re-arrange AWG menu	[14]
save settings every minute or so	[15]
Display measurements for digiwaves	[16]
AWG defaulted to a DC offset of 0V, 3V P-P, and 1kHz so it can be used for probe comp	[17]
Ensure lowest CPU consumption when acquisition is stopped	[18]
X-Y mode	[19]
Changing Colors for each channel would be a nice feature as well.	[20][21]
what if we could customise the colours of grid, channels and background?	[22]
ability to load the saved CSV and MAT files and view the waveform on the Smartscope GUI, so we can zoom in and out to the voltage and time scale	[23]
highlight the actual points taken (digitized) on the display waveform	[24]
scroll on the mouse to cycle through the logic analyser trigger condition	[25]
Hover+scroll wheel changes trigger options	[26]
Android touch button equiv of page up/dn and home end:	[27]
AWG takes HEX values rather than voltages	[28]
Digital output linked to AWG waveform	[29]
a package for the Raspberry Pi 2 running the default raspberry pi 2 Linux distribution	[30]
Show AC/DC and trigger edge in bubble (same as x10)	[31]
ability to turn off mousewheel	[32]
ping-pong memory architecture	[33]
duplex 4wire SPI output	[34]
mode: fix trigger position	[35]
trigger counter	[36]

Suggestion (hardware)	Origin
How about a nice fabric bag with a zipper, or better yet a clear one	[37]

Suggestions which helped improving our app!

Suggestion	Origin
Get that External trigger pin going	[38]
xth pulse triggering, pulse width triggering	[39]
independent analog channel triggering	[40]
time based triggering to analog channels	[41]
More complex trigger (hf reject etc)	[42]
save contents of RAM to disk	[43]
itd be nice if there was a record setting for just one screens worth.	[44]
select max outliers to display on grid while subsampling on fpga	[45]
"persistence" mode that would superimpose a number of traces on top of each other	[46]
extend decoders so they can generate a new waveform	[47]
Improve cursor contrast	[48]
Utra hi speed mode, trace acumulation, persistance	[49]
Option to invert analogwaves/digiwaves	[50] [51]
Make analog indicators docable the same way as the digital indicators are	[52]
Make height of indivisual graphs adjustable by dragging center bar	[53]
Option to 'unpower' AWG in analog mode	[54]
Sliders: numeric pad for exact value input	[55]
Show deltas of last 2 vertical and last 2 horizontal cursors	[56]
flash single/require trigger while not receiving data
there would be value in having a "Power OK" light or indication, even if it's back through software, that acceptable power is present.	[57]
allow 10ns/div	[58]
key auto-repeat	[59]
Right click or long press sets trigger to left 10% position	[60]
UART decoder	[61]
semi-automatic time measurement feature	[62]
Would be nice to turn off channels not being used in the LA.	[63]
Individual pins can't be hidden (as in o-scope) giving no screen space for the bus itself	[64]

Suggestions we believed didn't really fit in our idea of a perfect SmartScope

Suggestion	Origin
Scaling: window popup with the "canonical" time base or volt per division value	[65]
scroll causes voltage zoom, shift-scroll for time-zoom (opposite of today)	[66]