Suggestion box: Difference between revisions
Jump to navigation
Jump to search
mNo edit summary |
mNo edit summary |
||
Line 5: | Line 5: | ||
|- | |- | ||
| Get that External trigger pin going || [https://www.lab-nation.com/forum/hardware/topics/external-trigger] | | Get that External trigger pin going || [https://www.lab-nation.com/forum/hardware/topics/external-trigger] | ||
|- | |||
| Ensure lowest CPU consumption when acquisition is stopped || [https://www.lab-nation.com/forum/software/topics/smartscope-sw-draws-a-lot-of-current-power-on-an-android-device-even-when-not-in-use/posts/new?reply_to_id=1733] | |||
|- | |- | ||
| Option to invert analogwaves/digiwaves|| [https://www.lab-nation.com/forum/software/topics/math-decoders-issues-bugs] [https://www.lab-nation.com/forum/software/topics/option-to-invert-trace] | | Option to invert analogwaves/digiwaves|| [https://www.lab-nation.com/forum/software/topics/math-decoders-issues-bugs] [https://www.lab-nation.com/forum/software/topics/option-to-invert-trace] |
Revision as of 07:48, 30 September 2015
Suggestions
Suggestion | Origin |
---|---|
Get that External trigger pin going | [1] |
Ensure lowest CPU consumption when acquisition is stopped | [2] |
Option to invert analogwaves/digiwaves | [3] [4] |
select max outliers to display on grid while subsampling on fpga | [5] |
X-Y mode | [6] |
Changing Colors for each channel would be a nice feature as well. | [7][8] |
itd be nice if there was a record setting for just one screens worth. | [9] |
what if we could customise the colours of grid, channels and background? | [10] |
ability to load the saved CSV and MAT files and view the waveform on the Smartscope GUI, so we can zoom in and out to the voltage and time scale | [11] |
independent analog channel triggering | [12] |
allow 10ns/div | [13] |
time based triggering to analog channels | [14] |
highlight the actual points taken (digitized) on the display waveform | [15] |
scroll on the mouse to cycle through the logic analyser trigger condition | [16] |
"persistence" mode that would superimpose a number of traces on top of each other | [17] |
Hover+scroll wheel changes trigger options | [18] |
Utra hi speed mode, trace acumulation, persistance | [19] |
More complex trigger (hf reject etc) | [20] |
Android touch button equiv of page up/dn and home end: | [21] |
AWG takes HEX values rather than voltages | [22] |
Digital output linked to AWG waveform | [23] |
a package for the Raspberry Pi 2 running the default raspberry pi 2 Linux distribution | [24] |
Show AC/DC and trigger edge in bubble (same as x10) | [25] |
extend decoders so they can generate a new waveform | [26] |
ability to turn off mousewheel | [27] |
Suggestions which helped improving our app!
Suggestion | Origin |
---|---|
Make height of indivisual graphs adjustable by dragging center bar | [28] |
Option to 'unpower' AWG in analog mode | [29] |
Sliders: numeric pad for exact value input | [30] |
Show deltas of last 2 vertical and last 2 horizontal cursors | [31] |
flash single/require trigger while not receiving data | |
there would be value in having a "Power OK" light or indication, even if it's back through software, that acceptable power is present. | [32] |
key auto-repeat | [33] |
Right click or long press sets trigger to left 10% position | [34] |
UART decoder | [35] |
semi-automatic time measurement feature | [36] |
Would be nice to turn off channels not being used in the LA. | [37] |
Individual pins can't be hidden (as in o-scope) giving no screen space for the bus itself | [38] |
Suggestions we believed didn't really fit in our idea of a perfect SmartScope
Suggestion | Origin |
---|---|
Scaling: window popup with the "canonical" time base or volt per division value | [39] |
scroll causes voltage zoom, shift-scroll for time-zoom (opposite of today) | [40] |