Suggestion box

Suggestions

Suggestion (software)	Origin
Separate size control for numbers on the grid	[1]
Save to JSON format	[2]
Select which channels to save to file	[3]
Beep on trigger	[4]
Measurements also applicable to Math/Operator waves	[5]
FFT only on viewport (subsection of panorama)	[6]
High-resolution multimeter mode (by changing offset voltage)	[7]
Data logger functionality	[8]
Possibility to switch off peak detect	Vainney
Average instead of peak detect	Vainney
Numpad: highlight value instead of removing it	Ger
Documentation on USB protocol	sigrok
After fetching RAM data: also update Panorama	sigrok
Remove sliders and replace by numpads	Karsten
Show preview of AWG function to upload	Karsten
Save - replay functionality	Robert
Frequency response tool	[9]
Android keyboard support	[10]
In-app decoder output listing	[11]
On adding decoder: suggest to switch to require trigger or single trigger mode	[12]
Cursors in FFT window.	[13][14]
Record digital waveforms and reproduce them using digi-out	[15]
Mac users - keyboard and mouse	[16]
possibility to give a name to the channels like "CLK, status, CE_N, ..."	[17]
digi trigger through context menu	[18]
Re-arrange AWG menu	[19]
Display measurements for digiwaves	[20]
AWG defaulted to a DC offset of 0V, 3V P-P, and 1kHz so it can be used for probe comp	[21]
Ensure lowest CPU consumption when acquisition is stopped	[22]
Changing Colors for each channel would be a nice feature as well.	[23][24]
what if we could customise the colours of grid, channels and background?	[25]
ability to load the saved CSV and MAT files and view the waveform on the Smartscope GUI, so we can zoom in and out to the voltage and time scale	[26]
highlight the actual points taken (digitized) on the display waveform	[27]
scroll on the mouse to cycle through the logic analyser trigger condition	[28]
Hover+scroll wheel changes trigger options	[29]
Android touch button equiv of page up/dn and home end:	[30]
AWG takes HEX values rather than voltages	[31]
Digital output linked to AWG waveform	[32]
a package for the Raspberry Pi 2 running the default raspberry pi 2 Linux distribution	[33]
convert Operator wave into reference wave	[34]
Show AC/DC and trigger edge in bubble (same as x10)	[35]
ability to turn off mousewheel	[36]
ping-pong memory architecture	[37]
duplex 4wire SPI output	[38]
mode: fix trigger position	[39]
measurement: low and high period time	[Mail Tom]
trigger counter	[40]

Suggestion (hardware)	Origin
How about a nice fabric bag with a zipper, or better yet a clear one	[41]

Suggestions which helped improving our app!

Suggestion	Origin
Save decoder configuration	[42]
Save and recall entire configuration	[43]
save LA settings (trigger condition, arrangement of the channe)	[44]
Support for current probes	[45]
Support for 20x attenuators	Vainney
Edge counter between cursors	Vainney
save settings every minute or so	[46]
X-Y mode	[47]
Reference waveform	[48]
I2C decoder: show W/R in address block	Yentel
Need better FFT pan/zoom support	[49]
Get that External trigger pin going	[50]
xth pulse triggering, pulse width triggering	[51]
independent analog channel triggering	[52]
time based triggering to analog channels	[53]
More complex trigger (hf reject etc)	[54]
save contents of RAM to disk	[55]
itd be nice if there was a record setting for just one screens worth.	[56]
select max outliers to display on grid while subsampling on fpga	[57]
"persistence" mode that would superimpose a number of traces on top of each other	[58]
extend decoders so they can generate a new waveform	[59]
Improve cursor contrast	[60]
Utra hi speed mode, trace acumulation, persistance	[61]
Option to invert analogwaves/digiwaves	[62] [63]
Make analog indicators docable the same way as the digital indicators are	[64]
Make height of indivisual graphs adjustable by dragging center bar	[65]
Option to 'unpower' AWG in analog mode	[66]
Sliders: numeric pad for exact value input	[67]
Show deltas of last 2 vertical and last 2 horizontal cursors	[68]
flash single/require trigger while not receiving data
there would be value in having a "Power OK" light or indication, even if it's back through software, that acceptable power is present.	[69]
allow 10ns/div	[70]
key auto-repeat	[71]
Right click or long press sets trigger to left 10% position	[72]
UART decoder	[73]
semi-automatic time measurement feature	[74]
Would be nice to turn off channels not being used in the LA.	[75]
Sample on how to control digital outputs from Matlab	Jacobus
Individual pins can't be hidden (as in o-scope) giving no screen space for the bus itself	[76]

Suggestions we believed didn't really fit in our idea of a perfect SmartScope

Suggestion	Origin
Scaling: window popup with the "canonical" time base or volt per division value	[77]
scroll causes voltage zoom, shift-scroll for time-zoom (opposite of today)	[78]