Suggestion box: Difference between revisions
Jump to navigation
Jump to search
mNo edit summary |
m (→Suggestions) |
||
Line 7: | Line 7: | ||
|- | |- | ||
| Separate size control for numbers on the grid || [https://www.lab-nation.com/forum/software/topics/readibilty-of-minus-signs-on-y-axis?page=1] | | Separate size control for numbers on the grid || [https://www.lab-nation.com/forum/software/topics/readibilty-of-minus-signs-on-y-axis?page=1] | ||
|- | |||
| Don't switch to dummy scope when USB disconnected || [https://www.lab-nation.com/forum/software/topics/don-t-switch-to-dummy-scope-when-usb-disconnected] | |||
|- | |- | ||
| Save to JSON format || [https://www.lab-nation.com/forum/software/topics/recording-i2c-or-any-other-decoded-logic-signals] | | Save to JSON format || [https://www.lab-nation.com/forum/software/topics/recording-i2c-or-any-other-decoded-logic-signals] |
Revision as of 20:57, 10 February 2019
Suggestions
Suggestion (software) | Origin |
---|---|
Add pass-fail mask | [1] |
Separate size control for numbers on the grid | [2] |
Don't switch to dummy scope when USB disconnected | [3] |
Save to JSON format | [4] |
Select which channels to save to file | [5] |
Beep on trigger | [6] |
Measurements also applicable to Math/Operator waves | [7] |
FFT only on viewport (subsection of panorama) | [8] |
High-resolution multimeter mode (by changing offset voltage) | [9] |
Data logger functionality | [10] |
Possibility to switch off peak detect | Vainney |
Average instead of peak detect | Vainney |
Numpad: highlight value instead of removing it | Ger |
Documentation on USB protocol | sigrok |
After fetching RAM data: also update Panorama | sigrok |
Remove sliders and replace by numpads | Karsten |
Show preview of AWG function to upload | Karsten |
Save - replay functionality | Robert |
Frequency response tool | [11] |
Android keyboard support | [12] |
In-app decoder output listing | [13] |
On adding decoder: suggest to switch to require trigger or single trigger mode | [14] |
Cursors in FFT window. | [15][16] |
Record digital waveforms and reproduce them using digi-out | [17] |
Mac users - keyboard and mouse | [18] |
possibility to give a name to the channels like "CLK, status, CE_N, ..." | [19] |
digi trigger through context menu | [20] |
Re-arrange AWG menu | [21] |
Display measurements for digiwaves | [22] |
AWG defaulted to a DC offset of 0V, 3V P-P, and 1kHz so it can be used for probe comp | [23] |
Ensure lowest CPU consumption when acquisition is stopped | [24] |
Changing Colors for each channel would be a nice feature as well. | [25][26][27] |
what if we could customise the colours of grid, channels and background? | [28] |
ability to load the saved CSV and MAT files and view the waveform on the Smartscope GUI, so we can zoom in and out to the voltage and time scale | [29] |
highlight the actual points taken (digitized) on the display waveform | [30] |
scroll on the mouse to cycle through the logic analyser trigger condition | [31] |
Hover+scroll wheel changes trigger options | [32] |
Android touch button equiv of page up/dn and home end: | [33] |
AWG takes HEX values rather than voltages | [34] |
Digital output linked to AWG waveform | [35] |
a package for the Raspberry Pi 2 running the default raspberry pi 2 Linux distribution | [36] |
convert Operator wave into reference wave | [37] |
Show AC/DC and trigger edge in bubble (same as x10) | [38] |
ability to turn off mousewheel | [39] |
ping-pong memory architecture | [40] |
duplex 4wire SPI output | [41] |
mode: fix trigger position | [42] |
measurement: low and high period time | [Mail Tom] |
trigger counter | [43] |
Suggestion (hardware) | Origin |
---|---|
How about a nice fabric bag with a zipper, or better yet a clear one | [44] |
Suggestions which helped improving our app!
Suggestion | Origin |
---|---|
Save decoder configuration | [45] |
Save and recall entire configuration | [46] |
save LA settings (trigger condition, arrangement of the channe) | [47] |
Support for current probes | [48] |
Support for 20x attenuators | Vainney |
Edge counter between cursors | Vainney |
save settings every minute or so | [49] |
X-Y mode | [50] |
Reference waveform | [51] |
I2C decoder: show W/R in address block | Yentel |
Need better FFT pan/zoom support | [52] |
Get that External trigger pin going | [53] |
xth pulse triggering, pulse width triggering | [54] |
independent analog channel triggering | [55] |
time based triggering to analog channels | [56] |
More complex trigger (hf reject etc) | [57] |
save contents of RAM to disk | [58] |
itd be nice if there was a record setting for just one screens worth. | [59] |
select max outliers to display on grid while subsampling on fpga | [60] |
"persistence" mode that would superimpose a number of traces on top of each other | [61] |
extend decoders so they can generate a new waveform | [62] |
Improve cursor contrast | [63] |
Utra hi speed mode, trace acumulation, persistance | [64] |
Option to invert analogwaves/digiwaves | [65] [66] |
Make analog indicators docable the same way as the digital indicators are | [67] |
Make height of indivisual graphs adjustable by dragging center bar | [68] |
Option to 'unpower' AWG in analog mode | [69] |
Sliders: numeric pad for exact value input | [70] |
Show deltas of last 2 vertical and last 2 horizontal cursors | [71] |
flash single/require trigger while not receiving data | |
there would be value in having a "Power OK" light or indication, even if it's back through software, that acceptable power is present. | [72] |
allow 10ns/div | [73] |
key auto-repeat | [74] |
Right click or long press sets trigger to left 10% position | [75] |
UART decoder | [76] |
semi-automatic time measurement feature | [77] |
Would be nice to turn off channels not being used in the LA. | [78] |
Sample on how to control digital outputs from Matlab | Jacobus |
Individual pins can't be hidden (as in o-scope) giving no screen space for the bus itself | [79] |
Suggestions we believed didn't really fit in our idea of a perfect SmartScope
Suggestion | Origin |
---|---|
Scaling: window popup with the "canonical" time base or volt per division value | [80] |
scroll causes voltage zoom, shift-scroll for time-zoom (opposite of today) | [81] |