| Suggestion (software)
|
Origin
|
| Data logger functionality |
[1]
|
| Edge counter between cursors |
Vainney
|
| Numpad: highlight value instead of removing it |
Ger
|
| Documentation on USB protocol |
sigrok
|
| Save decoder configuration |
Alfons
|
| I2C decoder: show W/R in address block |
Yentel
|
| Remove sliders and replace by numpads |
Karsten
|
| Show preview of AWG function to upload |
Karsten
|
| Save - replay functionality |
Robert
|
| Frequency response tool |
[2]
|
| Android keyboard support |
[3]
|
| In-app decoder output listing |
[4]
|
| Reference waveform |
[5]
|
| On adding decoder: suggest to switch to require trigger or single trigger mode |
[6]
|
| Cursors in FFT window. |
[7]
|
| Record digital waveforms and reproduce them using digi-out |
[8]
|
| Mac users - keyboard and mouse |
[9]
|
| possibility to give a name to the channels like "CLK, status, CE_N, ..." |
[10]
|
| digi trigger through context menu |
[11]
|
| save LA settings (trigger condition, arrangement of the channe) |
[12]
|
| Re-arrange AWG menu |
[13]
|
| save settings every minute or so |
[14]
|
| Display measurements for digiwaves |
[15]
|
| AWG defaulted to a DC offset of 0V, 3V P-P, and 1kHz so it can be used for probe comp |
[16]
|
| Ensure lowest CPU consumption when acquisition is stopped |
[17]
|
| X-Y mode |
[18]
|
| Changing Colors for each channel would be a nice feature as well. |
[19][20]
|
| what if we could customise the colours of grid, channels and background? |
[21]
|
| ability to load the saved CSV and MAT files and view the waveform on the Smartscope GUI, so we can zoom in and out to the voltage and time scale |
[22]
|
| highlight the actual points taken (digitized) on the display waveform |
[23]
|
| scroll on the mouse to cycle through the logic analyser trigger condition |
[24]
|
| Hover+scroll wheel changes trigger options |
[25]
|
| Android touch button equiv of page up/dn and home end: |
[26]
|
| AWG takes HEX values rather than voltages |
[27]
|
| Digital output linked to AWG waveform |
[28]
|
| a package for the Raspberry Pi 2 running the default raspberry pi 2 Linux distribution |
[29]
|
| Show AC/DC and trigger edge in bubble (same as x10) |
[30]
|
| ability to turn off mousewheel |
[31]
|
| ping-pong memory architecture |
[32]
|
| duplex 4wire SPI output |
[33]
|
| mode: fix trigger position |
[34]
|
| trigger counter |
[35]
|