Suggestion (software)
|
Origin
|
FFT only on viewport (subsection of panorama) |
[1]
|
Support for current probes |
[2]
|
High-resolution multimeter mode (by changing offset voltage) |
[3]
|
Data logger functionality |
[4]
|
Possibility to switch off peak detect |
Vainney
|
Average instead of peak detect |
Vainney
|
Support for 20x attenuators |
Vainney
|
Numpad: highlight value instead of removing it |
Ger
|
Documentation on USB protocol |
sigrok
|
After fetching RAM data: also update Panorama |
sigrok
|
Save decoder configuration |
[5]
|
Save and recall entire configuration |
[6]
|
Remove sliders and replace by numpads |
Karsten
|
Show preview of AWG function to upload |
Karsten
|
Save - replay functionality |
Robert
|
Frequency response tool |
[7]
|
Android keyboard support |
[8]
|
In-app decoder output listing |
[9]
|
On adding decoder: suggest to switch to require trigger or single trigger mode |
[10]
|
Cursors in FFT window. |
[11][12]
|
Record digital waveforms and reproduce them using digi-out |
[13]
|
Mac users - keyboard and mouse |
[14]
|
possibility to give a name to the channels like "CLK, status, CE_N, ..." |
[15]
|
digi trigger through context menu |
[16]
|
save LA settings (trigger condition, arrangement of the channe) |
[17]
|
Re-arrange AWG menu |
[18]
|
save settings every minute or so |
[19]
|
Display measurements for digiwaves |
[20]
|
AWG defaulted to a DC offset of 0V, 3V P-P, and 1kHz so it can be used for probe comp |
[21]
|
Ensure lowest CPU consumption when acquisition is stopped |
[22]
|
Changing Colors for each channel would be a nice feature as well. |
[23][24]
|
what if we could customise the colours of grid, channels and background? |
[25]
|
ability to load the saved CSV and MAT files and view the waveform on the Smartscope GUI, so we can zoom in and out to the voltage and time scale |
[26]
|
highlight the actual points taken (digitized) on the display waveform |
[27]
|
scroll on the mouse to cycle through the logic analyser trigger condition |
[28]
|
Hover+scroll wheel changes trigger options |
[29]
|
Android touch button equiv of page up/dn and home end: |
[30]
|
AWG takes HEX values rather than voltages |
[31]
|
Digital output linked to AWG waveform |
[32]
|
a package for the Raspberry Pi 2 running the default raspberry pi 2 Linux distribution |
[33]
|
convert Operator wave into reference wave |
[34]
|
Show AC/DC and trigger edge in bubble (same as x10) |
[35]
|
ability to turn off mousewheel |
[36]
|
ping-pong memory architecture |
[37]
|
duplex 4wire SPI output |
[38]
|
mode: fix trigger position |
[39]
|
trigger counter |
[40]
|