| Suggestion (software)
|
Origin
|
| Add pass-fail mask |
[1]
|
| Separate size control for numbers on the grid |
[2]
|
| Don't switch to dummy scope when USB disconnected |
[3]
|
| Save to JSON format |
[4]
|
| Select which channels to save to file |
[5]
|
| Beep on trigger |
[6]
|
| Don't auto-change to Rolling mode |
[7]
|
| Measurements also applicable to Math/Operator waves |
[8]
|
| FFT only on viewport (subsection of panorama) |
[9]
|
| High-resolution multimeter mode (by changing offset voltage) |
[10]
|
| Data logger functionality |
[11]
|
| Possibility to switch off peak detect |
Vainney
|
| Average instead of peak detect |
Vainney
|
| Numpad: highlight value instead of removing it |
Ger
|
| Documentation on USB protocol |
sigrok
|
| After fetching RAM data: also update Panorama |
sigrok
|
| Remove sliders and replace by numpads |
Karsten
|
| Show preview of AWG function to upload |
Karsten
|
| Save - replay functionality |
Robert
|
| Add ESC button to keyboard |
Harry
|
| high-time, low-time measurement |
Seb
|
| Frequency response tool |
[12]
|
| Android keyboard support |
[13]
|
| In-app decoder output listing |
[14]
|
| On adding decoder: suggest to switch to require trigger or single trigger mode |
[15]
|
| Cursors in FFT window. |
[16][17]
|
| Record digital waveforms and reproduce them using digi-out |
[18]
|
| Mac users - keyboard and mouse |
[19]
|
| possibility to give a name to the channels like "CLK, status, CE_N, ..." |
[20]
|
| digi trigger through context menu |
[21]
|
| Re-arrange AWG menu |
[22]
|
| Display measurements for digiwaves |
[23]
|
| AWG defaulted to a DC offset of 0V, 3V P-P, and 1kHz so it can be used for probe comp |
[24]
|
| Ensure lowest CPU consumption when acquisition is stopped |
[25]
|
| Changing Colors for each channel would be a nice feature as well. |
[26][27][28]
|
| what if we could customise the colours of grid, channels and background? |
[29]
|
| ability to load the saved CSV and MAT files and view the waveform on the Smartscope GUI, so we can zoom in and out to the voltage and time scale |
[30]
|
| highlight the actual points taken (digitized) on the display waveform |
[31]
|
| scroll on the mouse to cycle through the logic analyser trigger condition |
[32]
|
| Hover+scroll wheel changes trigger options |
[33]
|
| Android touch button equiv of page up/dn and home end: |
[34]
|
| AWG takes HEX values rather than voltages |
[35]
|
| Digital output linked to AWG waveform |
[36]
|
| a package for the Raspberry Pi 2 running the default raspberry pi 2 Linux distribution |
[37]
|
| convert Operator wave into reference wave |
[38]
|
| Show AC/DC and trigger edge in bubble (same as x10) |
[39]
|
| ability to turn off mousewheel |
[40]
|
| ping-pong memory architecture |
[41]
|
| duplex 4wire SPI output |
[42]
|
| mode: fix trigger position |
[43]
|
| measurement: low and high period time |
[Mail Tom]
|
| trigger counter |
[44]
|