Changelog

Upcoming

• [All] Vertical pinching doesn't change the offset anymore unless it's really intended
• [Win] Bugfix: Protection agains rare GUI lockup caused by mousescrolls
• [All] Bugfix: empty decoders draw at least a flat line
• [All] Decoders input waves can now be optional (just declare input type as nullable)
• [All] New decoder Digital Bus: convert up to 8 inputs into decimal/hex/bin/ascii value
• [All] Possibility to define the thickness of all waves, to increase their visibility on hi-res screens
• [All] Merge Logic Analyser and scope view
• [All] Allow storage of entire acquisition when pressing record while scope is stopped and entire acquisition was transferred to host
• [All] Save decoder output to CSV from decoder's context menu

0.2.0.0

• [All] Support for device model A15

0.1.0.0

• [All] Mouse scroll on panorama now also focuses viewport on cursor location
• [All] Mouse scroll now zooms in same direction for mainGraph and panorama
• [All] Mouse scroll now zooms on center of screen while running; zooms on pointer when stopped
• [All] Various crashfixes for decoders
• [All] Mousing over LA wave automatically shows intervals
• [All] Intervals can be always shown, or only when wave is activated
• [All] Edge-to-edge interval indication in LA mode
• [Windows] Mouse events are no longer captured when other windows are on top
• [Windows] Solved smearing issue on DirectX-systems (finally!)
• [All] Auto trigger lock is independent of sample frequency (used to double as sample frequency halfs)
• [All] Basic numpad input for sliders (double click to get numpad). Still working on graphics and keyboard input. Only mouse/touch for now

0.0.8.4

• [All] First implementation of the RAM Fetch mechanism (with a few drawbacks left unattended)
• [All] Moving the deltacursor moves both parents as well
• [All] Cursors can be referenced to waves or to screen
• [All] Protocol decoders: decoded values can be translated to ASCII chars
• [All] Bugfix: large Context dropdown menus no longer go out of screen
• [All] Bugfix: changing GUI size while context menus are open no longer causes a crash
• [All] Tapping vertical Delta indicator causes it to switch between time/freq indication
• [All] Tapping indicators causes them to attract delta cursor
• [All] Horizontal and Vertical Delta cursors display difference between 2 last regular cursors
• [Win,OSX,Lin] Support for long keypresses
• [All] Mouseclicks also detected when clicked while mouse was moving
• [All] Protocol decoders: source channels name shown in indicator
• [All] Protocol decoders: plugin-based auto-detection
• [All] Protocol decoders: parameter architecture + selection in GUI
• [All] Protocol decoders: 4wire SPI decoder added
• [All] Protocol decoders: input source selection
• [All] Logic analyzer: waves can be repositioned
• [All] Protocol decoders: plugins working on Win,Lin,OSX,Android
• [All] Protocol decoders: 3wire SPI decoder added
• [All] Protocol decoders: working for Scope and LA mode
• [All] Protocol decoders: I2C decoder added
• [All] Protocol decoders: plugin-based auto-detection
• [All] Protocol decoders: basic architecture
• [All] AWG minimal samples down to 20
• [All] Properly initialize digital trigger indicators
• [All] Consider viewport zooming as an indication that the panorama is desired
• [All] Get protocol decoder from dropbox or ~/LabNation/Plugins
• [All] Fetch entire RAM when scope is stopped

0.0.8.3

• [All] Better font and image rendering and restored transparency where it broke (i.e. side menu)

0.0.8.1

• [Android] Added multi-resolution resources to ensure Google Play accepts tablet compatibility

0.0.8.0

• [All] Timebar waveforms working for SmartScope in LA mode
• [All] Timebar logic analyser waveforms scaling properly
• [All] Fix bug where you can't shrink acqbuf when the viewport spans length equals acquisition length
• [MacOS] Graceful quit when quitting app through OS
• [All] Show error interval for frequency measurement
• [All] Fix pinch gesture center retention
• [All] Grid ticks correctly placed when panning viewfinder futher than 1 viewport length from time origin
• [All] Restore Y-offset of analog channels
• [All] Fix on zooming LA waves
• [All] Logic Analyser trigger fix
  • wouldn't trigger when leaving scope mode triggering on ch B
  • Hold off was incorrect
• [Android] In-app update for direct APK installs
• [All] Scope disconnect issue
• [All] Settings persistence
• [All] Switched to 8 vertical division instead of 10 to comply with traditional scopes
• [All] All types of zooming now have same max limit of 5V/div
• [All] Vertical offset cannot be set out of range anymore
• [All] Trigger level clipped to effective range
• [All] Indicator stickyness settable to major/minor/no ticks
• [All] Support AWG from CSV through dropbox
• [All] Probe scale factor correction
• [All] Frequency measurement improved (2 cycles is enough for a frequency detection)
• [All] Full usage of RAM / implemented overview timebar
• [Windows] Don't crash when device detection fails
• [All] Show state of trigger (armed/awaiting trigger)
• [All] Draw lines as lines, not using triangles, resulting in thinner yet better display
• [Windows][Mac][Linux] Use space bar to start/stop
• [Windows][Mac][Linux] Use 'V'-key to toggle timebar
• [Touch] Pinch gray area of timebar to resize
• [All] Doubletap/click timebar to hide, doubletap/click top graph border to show
• [All] Timebar better highlighting in dark mode
• [All] Correct viewport setting when acquisition buffer increased after acquisition was stopped
• [Windows][Mac][Linux] Use 'I' and 'O'-key to shrink/grow acquistion length
• [All] Correctly count data refresh rate (only count newly started acquisitions)
• [Windows][Mac][Linux] A/S/D set acquisition mode to Auto/Single/Normal
• [All] Inversed measurement box toggle button order
• [All] Don't show toggle button for unavailable measurement box
• [All] DummyScope trigger fix
• [All] Store channel coupling in settings
• [All] Measurement box hide/show and location storage fix
• [All] Added duty cycle measurement
• [All] Optimised waveform measuring
• [All] Setting to choose viewport behaviour when acquisition length is changed
• [All] Use F2/F3/F4 to toggle measurement boxes
• [All] Auto-update configurable and periodic (10 minutes)
• [All] Allow timescaling when no wave on grid
• [All] Better grid pinch / wave selection interaction
• [Linux] Added dependency to libmono-system-numerics4.0-cil
• [All] Logic analyser waveform drawing bugfix
• [All] Spurious jump from LA mode back to scope mode fix

0.0.7.3

• [Mac] Fix USB init
• [All] Save settings

0.0.7.1

• [Windows] Resize bug fix

0.0.7.0

• [iOS] Device can be plugged after app started
• [All] Avoid crashing when accessing SmartScope while/after it's being unplugged
• [All] Fix crash sites due to IO thread changing UI
• [iOS] compute ppi
• [iOS] splash
• [iOS] No letterboxing on iPhone5+
• [All] Rolling mode enabled by default. When the time range is too large, don't try to trigger but stream data as it comes in
• [All] Trigger vertical threshold increased to lower false positives due to noise (will be settable in future)
• [All] Allow horizontally moving waveform after stopping acquisition (though no additional data is fetched from SmartScope yet)
• [Linux] Udev rules use plugdev group for smartscope device
• [All] Measurement box can be dragged away on any edge if pushed far enough
• [All] Ending a drag gesture only taps a button if the end of the gesture happend on that button
• [All] CSV storage doesn't crash app
• [All] CSV storage has excel "sep=" option on first line
• [OS X] resizing
• [All] Make sidemenu toggle instead of only open
• [All] Cheat sheet available from system menu
• [All] Quit available from system menu
• [All] False triggering should occurs far less
• [Linux] Shutdown problem