Suggestion box

Suggestions

Suggestion (software)	Origin
Get that External trigger pin going	[1]
Cursors in FFT window.	[2]
Re-arrange AWG menu	[3]
save settings every minute or so	[4]
Display measurements for digiwaves	[5]
AWG defaulted to a DC offset of 0V, 3V P-P, and 1kHz so it can be used for probe comp	[6]
Make analog indicators docable the same way as the digital indicators are	[7]
Ensure lowest CPU consumption when acquisition is stopped	[8]
Option to invert analogwaves/digiwaves	[9] [10]
select max outliers to display on grid while subsampling on fpga	[11]
X-Y mode	[12]
Changing Colors for each channel would be a nice feature as well.	[13][14]
itd be nice if there was a record setting for just one screens worth.	[15]
what if we could customise the colours of grid, channels and background?	[16]
ability to load the saved CSV and MAT files and view the waveform on the Smartscope GUI, so we can zoom in and out to the voltage and time scale	[17]
independent analog channel triggering	[18]
allow 10ns/div	[19]
time based triggering to analog channels	[20]
highlight the actual points taken (digitized) on the display waveform	[21]
scroll on the mouse to cycle through the logic analyser trigger condition	[22]
"persistence" mode that would superimpose a number of traces on top of each other	[23]
Hover+scroll wheel changes trigger options	[24]
Utra hi speed mode, trace acumulation, persistance	[25]
More complex trigger (hf reject etc)	[26]
Android touch button equiv of page up/dn and home end:	[27]
AWG takes HEX values rather than voltages	[28]
Digital output linked to AWG waveform	[29]
a package for the Raspberry Pi 2 running the default raspberry pi 2 Linux distribution	[30]
Show AC/DC and trigger edge in bubble (same as x10)	[31]
extend decoders so they can generate a new waveform	[32]
ability to turn off mousewheel	[33]

Suggestion (hardware)	Origin
How about a nice fabric bag with a zipper, or better yet a clear one	[34]

Suggestions which helped improving our app!

Suggestion	Origin
Make height of indivisual graphs adjustable by dragging center bar	[35]
Option to 'unpower' AWG in analog mode	[36]
Sliders: numeric pad for exact value input	[37]
Show deltas of last 2 vertical and last 2 horizontal cursors	[38]
flash single/require trigger while not receiving data
there would be value in having a "Power OK" light or indication, even if it's back through software, that acceptable power is present.	[39]
key auto-repeat	[40]
Right click or long press sets trigger to left 10% position	[41]
UART decoder	[42]
semi-automatic time measurement feature	[43]
Would be nice to turn off channels not being used in the LA.	[44]
Individual pins can't be hidden (as in o-scope) giving no screen space for the bus itself	[45]

Suggestions we believed didn't really fit in our idea of a perfect SmartScope

Suggestion	Origin
Scaling: window popup with the "canonical" time base or volt per division value	[46]
scroll causes voltage zoom, shift-scroll for time-zoom (opposite of today)	[47]