Suggestion (software)
|
Origin
|
Get that External trigger pin going |
[1]
|
Documentation on USB protocol |
sigrok
|
xth pulse triggering, pulse width triggering |
h[ttps://www.lab-nation.com/forum/software/topics/trigger-every-2nd-or-3rd-pulse?page=1]
|
Cursors in FFT window. |
[2]
|
Record digital waveforms and reproduce them using digi-out |
[3]
|
possibility to give a name to the channels like "CLK, status, CE_N, ..." |
[4]
|
digi trigger through context menu |
[5]
|
save LA settings (trigger condition, arrangement of the channe) |
[6]
|
Re-arrange AWG menu |
[7]
|
save settings every minute or so |
[8]
|
Display measurements for digiwaves |
[9]
|
AWG defaulted to a DC offset of 0V, 3V P-P, and 1kHz so it can be used for probe comp |
[10]
|
Ensure lowest CPU consumption when acquisition is stopped |
[11]
|
X-Y mode |
[12]
|
Changing Colors for each channel would be a nice feature as well. |
[13][14]
|
itd be nice if there was a record setting for just one screens worth. |
[15]
|
what if we could customise the colours of grid, channels and background? |
[16]
|
ability to load the saved CSV and MAT files and view the waveform on the Smartscope GUI, so we can zoom in and out to the voltage and time scale |
[17]
|
independent analog channel triggering |
[18]
|
time based triggering to analog channels |
[19]
|
highlight the actual points taken (digitized) on the display waveform |
[20]
|
scroll on the mouse to cycle through the logic analyser trigger condition |
[21]
|
Hover+scroll wheel changes trigger options |
[22]
|
More complex trigger (hf reject etc) |
[23]
|
Android touch button equiv of page up/dn and home end: |
[24]
|
AWG takes HEX values rather than voltages |
[25]
|
Digital output linked to AWG waveform |
[26]
|
a package for the Raspberry Pi 2 running the default raspberry pi 2 Linux distribution |
[27]
|
Show AC/DC and trigger edge in bubble (same as x10) |
[28]
|
extend decoders so they can generate a new waveform |
[29]
|
ability to turn off mousewheel |
[30]
|