Suggestion box

Suggestions

Suggestion (software)	Origin
Data logger functionality	[1]
Edge counter between cursors	Vainney
Numpad: highlight value instead of removing it	Ger
Documentation on USB protocol	sigrok
Save decoder configuration	Alfons
Remove sliders and replace by numpads	Karsten
Show preview of AWG function to upload	Karsten
In-app decoder output listing	[2]
Reference waveform	[3]
On adding decoder: suggest to switch to require trigger or single trigger mode	[4]
Cursors in FFT window.	[5]
Record digital waveforms and reproduce them using digi-out	[6]
Mac users - keyboard and mouse	[7]
possibility to give a name to the channels like "CLK, status, CE_N, ..."	[8]
digi trigger through context menu	[9]
save LA settings (trigger condition, arrangement of the channe)	[10]
Re-arrange AWG menu	[11]
save settings every minute or so	[12]
Display measurements for digiwaves	[13]
AWG defaulted to a DC offset of 0V, 3V P-P, and 1kHz so it can be used for probe comp	[14]
Ensure lowest CPU consumption when acquisition is stopped	[15]
X-Y mode	[16]
Changing Colors for each channel would be a nice feature as well.	[17][18]
what if we could customise the colours of grid, channels and background?	[19]
ability to load the saved CSV and MAT files and view the waveform on the Smartscope GUI, so we can zoom in and out to the voltage and time scale	[20]
highlight the actual points taken (digitized) on the display waveform	[21]
scroll on the mouse to cycle through the logic analyser trigger condition	[22]
Hover+scroll wheel changes trigger options	[23]
Android touch button equiv of page up/dn and home end:	[24]
AWG takes HEX values rather than voltages	[25]
Digital output linked to AWG waveform	[26]
a package for the Raspberry Pi 2 running the default raspberry pi 2 Linux distribution	[27]
Show AC/DC and trigger edge in bubble (same as x10)	[28]
ability to turn off mousewheel	[29]

Suggestion (hardware)	Origin
How about a nice fabric bag with a zipper, or better yet a clear one	[30]

Suggestions which helped improving our app!

Suggestion	Origin
Get that External trigger pin going	[31]
xth pulse triggering, pulse width triggering	[32]
independent analog channel triggering	[33]
time based triggering to analog channels	[34]
More complex trigger (hf reject etc)	[35]
save contents of RAM to disk	[36]
itd be nice if there was a record setting for just one screens worth.	[37]
select max outliers to display on grid while subsampling on fpga	[38]
"persistence" mode that would superimpose a number of traces on top of each other	[39]
extend decoders so they can generate a new waveform	[40]
Utra hi speed mode, trace acumulation, persistance	[41]
Option to invert analogwaves/digiwaves	[42] [43]
Make analog indicators docable the same way as the digital indicators are	[44]
Make height of indivisual graphs adjustable by dragging center bar	[45]
Option to 'unpower' AWG in analog mode	[46]
Sliders: numeric pad for exact value input	[47]
Show deltas of last 2 vertical and last 2 horizontal cursors	[48]
flash single/require trigger while not receiving data
there would be value in having a "Power OK" light or indication, even if it's back through software, that acceptable power is present.	[49]
allow 10ns/div	[50]
key auto-repeat	[51]
Right click or long press sets trigger to left 10% position	[52]
UART decoder	[53]
semi-automatic time measurement feature	[54]
Would be nice to turn off channels not being used in the LA.	[55]
Individual pins can't be hidden (as in o-scope) giving no screen space for the bus itself	[56]

Suggestions we believed didn't really fit in our idea of a perfect SmartScope

Suggestion	Origin
Scaling: window popup with the "canonical" time base or volt per division value	[57]
scroll causes voltage zoom, shift-scroll for time-zoom (opposite of today)	[58]