Changelog

Upcoming

Currently implementing

• [All] 4-channel mode
• [Android] Audio jack input

Implemented in the betas (download from our package repository!)

Nothing yet! v0.8 was released just a couple of days ago

0.8.0.0 (2016/03/29)

• [All] Major update to trigger system: support for external trigger mode, as well as pulse and timeout!
• [All] Digital output (both sample signals as CSV upload)
• [All] Reference waves
• [All] Complete redesign of waveform memory management, improving performance on all platforms (especially when handling full acquisition buffers)
• [All] Trigger system: support for external trigger on AUX connector
• [All] Trigger system: added Any edge triggering (next to rising and falling)
• [All] Trigger system: added Pulse triggering mode
• [All] Trigger system: added Timeout triggering mode
• [All] V/div labels are now Picking wheels (compared to single-value sliders in v0.7)
• [All] Wave thickness setting stored between sessions; changes default from Hairline to 2pt
• [All] Make sure "Normal" UI size fits by using a lower DPI than system reports. (especially useful on small screens with high DPI, where "normal" can become rather large)
• [All] Upload wavegenerator data as bytes in addition to voltages
• [All] New menu structure to better separate 'global' items from acquisition items
• [All] Improved speed and detection rate of AutoArrange functionality
• [All] Solved performance drain when menu was opened
• [All] Re-enabled Dropbox support for storing/loading data
• [Android] Fix battery draining while suspended
• [Desktop] Keyboard controls for some dialogs - keyboard caught by all dialogs
• [All] ... and a whole bunch of smaller improvements and fixes

0.7.0.0 (2016/01/27)

• [Windows][Linux][MacOS] Matlab: SmartScope can be controlled from Matlab, acquisitions can be read out to and displayed by Matlab
• [All] Entirely revamped and extended Recording subsystem
• [All] Acquisition depth can now be set to 128k, 256k, 512k, 1M, 2M or 4M from the menu
• [All] Recording: data acquired during rolling mode can now be saved to csv and/or mat files
• [All] Recording: ability to store X acquisitions every Y seconds
• [All] Recording: entire contents of RAM can now be saved to csv and/or mat files
• [All] Recording: CSV file saving much faster, all data presented as columns
• [All] Recording: all internal channels (including decoders and raw FPGA data) now saved to disk
• [All] Zooming: vertical scaling can now also be done by sliding voltage/division indicators up or down
• [All] Zooming: vertical scaling can now also be done by scrolling the mousewheel above the voltage/division indicator
• [All] Zooming: horizontal scaling can now be done by double-tapping/clicking on a wave
• [All] Performance: much faster handling+displaying of full acquisition buffer (major improvement for slower tablets)
• [All] Fixed plenty of bugs occuring when switching to/from Rolling mode

0.6.0.2 + 0.6.0.3(2016/01/06)

• [MacOS] Fixed libUSB (crash when unplugging smartscope)

0.6.0.1 (2015/12/07)

• [All] Fix bug where scope settings needed to be set twice before taking effect
• [All] Fix spike detection in mixed mode

0.6.0.0 (2015/11/26)

• [All] 2GS/s Equivalent time sampling rate for high-speed periodic signals
• [All] Sin(x)/x interpolation for more accurate trigger positioning of high-freq signal
• [All] Peak-detect acquisition (analog signals): seeing narrow pulses spaced far apart in time
• [All] Peak-detect acquisition (digital signals): seeing narrow pulses spaced far apart in time
• [All] Speedup in interactions when acquisition is stopped (needed because much more data is available when stopped)
• [All] Small operator/decoder improvements: more intuitive names, faster menu access, context menu shown when operator/wave is added
• [All] Order of digiwaves is now retained when switching between modes, and between sessions
• [All] Bugfix: Fixed panorama flickering bug
• [All] Bugfix: More robust way of dealing with ParkedIndicators, as some of them were reported missing
• [All] Crashfix: Auto-arrange only working while scope is running
• [iOS] Back in autobuild system (fix required for iOS9)

0.5.0.0 (2015/10/12)

• [All] Added entirely new Operator subsystem, inheriting from Decoder subsystem, hence completely open and extendable
• [All] Numpad values can be entered through keyboard when available
• [All] Decoders can now use the numpad to specify parameter values
• [All] Numpad restored and improved
• [All] Voltage scaling working correctly for AnalogOperators
• [All] Operators can now be cross-referenced without performance hick-ups
• [All] Visibility of waves is stored between sessions
• [All] All analog channels are now docable the same way as the digital channels. Backspace now hides any active channel.
• [All] Extended Operator subsytem to allow time-based operations. First sample operator added: Average
• [All] Analog operator added: Math
• [All] Analog operator added: Absolute value
• [All] Analog operator added: Digital to analog (convert a digiwave from the digital grid onto the analog grid to be used as input for other operators)
• [All] Analog operator added: Invert
• [All] Analog operator added: Round to integer
• [All] Digital operator added: Invert
• [All] Crashfix: adding decoders while FFT is enabled no longer causes FFT waves to be used as inputs for decoders, which was causing some of them to crash
• [All] Menus are now closed by almost all interactions
• [All] Added option to unpower AWG
• [All] Made decoder wave dragging behaviour identical to analog+digital waves (when dragged on indicator or wave, snaps on digital grid)
• [All] Updates checked once every 24h instead of 10mins
• [All] Height of each graph is draggable

0.4.1.3 (2015/09/25)

• [iOS] back in build cycle

0.4.1.1 and 0.4.1.2 (2015/09/25)

• [XP] Windows XP build fix

0.4.1.0 (2015/09/24)

• [All] FFT: now possible to select Window type
• [XP] Added WindowsGL to beta build system
• [All] More intuitive ways to close the main menu (clicking outside window, on bottom area of menu, etc)

0.4.0.0 (2015/09/23)

• [All] FFT: FFT now available as additional grid available in Analog mode
• [All] FFT: all settings stored in between sessions
• [All] FFT: labels at major gridlines for freqgraph
• [All] FFT: support for RAMfetch giving much finer detail
• [All] FFT: voltAxis supports Voltage or dB mode
• [All] FFT: freqAxis supports linear or logarithmic mode
• [All] Added support for /100 input probes (or /10 attenuator with /10 probe)
• [All] Fixed odd behaviour where switching between rolling and normal mode caused hickups
• [All] Bugfix: Vertical cursors are not drawn over Panorama anymore

0.3.0.0

• [All] Mixed mode: dual-grid view for Mixed mode
• [All] Added Auto-Arrange feature
• [All] Disabled/Enabled settings of digital channels are saved between sessions
• [All] LA channels are now hideable, moving them to bottom-right of screen
• [All] Mixed mode: time cursors belong to specific grid, but timebar shared among analog and digital grid
• [All] Mixed mode: clean separation in Analog, Digital and Mixed mode
• [All] Bugfixes: context menu not drawn over main menu, cursors not drawn underneath digiwaves, analog waves not drawn over panorama
• [All] Toucheable areas of indicators no longer overlap each other
• [All] Bugfix: Large analog waves no longer overlap with Panorama
• [All] App now tries to map correct signals to decoders automatically
• [All] New decoder: UART/RS232 by Robert44
• [All] Horizontal and vertical zooming/panning can also be done on NumPad keys
• [All] First version of combined Analog + Digital mode
• [All] Vertical pinching doesn't change the offset anymore unless it's really intended
• [Win] Bugfix: Protection agains rare GUI lockup caused by mousescrolls
• [All] Bugfix: empty decoders draw at least a flat line
• [All] Decoders input waves can now be optional (just declare input type as nullable)
• [All] New decoder Digital Bus: convert up to 8 inputs into decimal/hex/bin/ascii value
• [All] Possibility to define the thickness of all waves, to increase their visibility on hi-res screens
• [All] Merge Logic Analyser and scope view
• [All] Allow storage of entire acquisition when pressing record while scope is stopped and entire acquisition was transferred to host
• [All] Save decoder output to CSV from decoder's context menu

0.2.0.2

• [All] Support for production batch A16

0.2.0.1

• [All] Support for production batch A15

0.1.0.0

• [All] Edge-to-edge interval indication in LA mode
• [All] Mouse scroll on panorama now also focuses viewport on cursor location
• [All] Mouse scroll now zooms in same direction for mainGraph and panorama
• [All] Mouse scroll now zooms on center of screen while running; zooms on pointer when stopped
• [All] Various crashfixes for decoders
• [All] Mousing over LA wave automatically shows intervals
• [All] Intervals can be always shown, or only when wave is activated
• [Windows] Mouse events are no longer captured when other windows are on top
• [Windows] Solved smearing issue on DirectX-systems (finally!)
• [All] Auto trigger lock is independent of sample frequency (used to double as sample frequency halfs)
• [All] Basic numpad input for sliders (double click to get numpad). Still working on graphics and keyboard input. Only mouse/touch for now

0.0.8.4

• [All] First implementation of the RAM Fetch mechanism
• [All] Protocol decoders: basic architecture
• [All] Moving the deltacursor moves both parents as well
• [All] Cursors can be referenced to waves or to screen
• [All] Protocol decoders: decoded values can be translated to ASCII chars
• [All] Bugfix: large Context dropdown menus no longer go out of screen
• [All] Bugfix: changing GUI size while context menus are open no longer causes a crash
• [All] Tapping vertical Delta indicator causes it to switch between time/freq indication
• [All] Tapping indicators causes them to attract delta cursor
• [All] Horizontal and Vertical Delta cursors display difference between 2 last regular cursors
• [Windows][OSX][Linux] Support for long keypresses
• [All] Mouseclicks also detected when clicked while mouse was moving
• [All] Protocol decoders: source channels name shown in indicator
• [All] Protocol decoders: plugin-based auto-detection
• [All] Protocol decoders: parameter architecture + selection in GUI
• [All] Protocol decoders: 4wire SPI decoder added
• [All] Protocol decoders: input source selection
• [All] Logic analyzer: waves can be repositioned
• [All] Protocol decoders: plugins working on Win,Lin,OSX,Android
• [All] Protocol decoders: 3wire SPI decoder added
• [All] Protocol decoders: working for Scope and LA mode
• [All] Protocol decoders: I2C decoder added
• [All] Protocol decoders: plugin-based auto-detection
• [All] AWG minimal samples down to 20
• [All] Properly initialize digital trigger indicators
• [All] Consider viewport zooming as an indication that the panorama is desired
• [All] Get protocol decoder from dropbox or ~/LabNation/Plugins
• [All] Fetch entire RAM when scope is stopped

0.0.8.3

• [All] Better font and image rendering and restored transparency where it broke (i.e. side menu)

0.0.8.1

• [Android] Added multi-resolution resources to ensure Google Play accepts tablet compatibility

0.0.8.0

• [All] Timebar waveforms working for SmartScope in LA mode
• [All] Timebar logic analyser waveforms scaling properly
• [All] Fix bug where you can't shrink acqbuf when the viewport spans length equals acquisition length
• [MacOS] Graceful quit when quitting app through OS
• [All] Show error interval for frequency measurement
• [All] Fix pinch gesture center retention
• [All] Grid ticks correctly placed when panning viewfinder futher than 1 viewport length from time origin
• [All] Restore Y-offset of analog channels
• [All] Fix on zooming LA waves
• [All] Logic Analyser trigger fix
  • wouldn't trigger when leaving scope mode triggering on ch B
  • Hold off was incorrect
• [Android] In-app update for direct APK installs
• [All] Scope disconnect issue
• [All] Settings persistence
• [All] Switched to 8 vertical division instead of 10 to comply with traditional scopes
• [All] All types of zooming now have same max limit of 5V/div
• [All] Vertical offset cannot be set out of range anymore
• [All] Trigger level clipped to effective range
• [All] Indicator stickyness settable to major/minor/no ticks
• [All] Support AWG from CSV through dropbox
• [All] Probe scale factor correction
• [All] Frequency measurement improved (2 cycles is enough for a frequency detection)
• [All] Full usage of RAM / implemented overview timebar
• [Windows] Don't crash when device detection fails
• [All] Show state of trigger (armed/awaiting trigger)
• [All] Draw lines as lines, not using triangles, resulting in thinner yet better display
• [Windows][Mac][Linux] Use space bar to start/stop
• [Windows][Mac][Linux] Use 'V'-key to toggle timebar
• [Touch] Pinch gray area of timebar to resize
• [All] Doubletap/click timebar to hide, doubletap/click top graph border to show
• [All] Timebar better highlighting in dark mode
• [All] Correct viewport setting when acquisition buffer increased after acquisition was stopped
• [Windows][Mac][Linux] Use 'I' and 'O'-key to shrink/grow acquistion length
• [All] Correctly count data refresh rate (only count newly started acquisitions)
• [Windows][Mac][Linux] A/S/D set acquisition mode to Auto/Single/Normal
• [All] Inversed measurement box toggle button order
• [All] Don't show toggle button for unavailable measurement box
• [All] DummyScope trigger fix
• [All] Store channel coupling in settings
• [All] Measurement box hide/show and location storage fix
• [All] Added duty cycle measurement
• [All] Optimised waveform measuring
• [All] Setting to choose viewport behaviour when acquisition length is changed
• [All] Use F2/F3/F4 to toggle measurement boxes
• [All] Auto-update configurable and periodic (10 minutes)
• [All] Allow timescaling when no wave on grid
• [All] Better grid pinch / wave selection interaction
• [Linux] Added dependency to libmono-system-numerics4.0-cil
• [All] Logic analyser waveform drawing bugfix
• [All] Spurious jump from LA mode back to scope mode fix

0.0.7.3

• [Mac] Fix USB init
• [All] Save settings

0.0.7.1

• [Windows] Resize bug fix

0.0.7.0

• [iOS] Device can be plugged after app started
• [All] Avoid crashing when accessing SmartScope while/after it's being unplugged
• [All] Fix crash sites due to IO thread changing UI
• [iOS] compute ppi
• [iOS] splash
• [iOS] No letterboxing on iPhone5+
• [All] Rolling mode enabled by default. When the time range is too large, don't try to trigger but stream data as it comes in
• [All] Trigger vertical threshold increased to lower false positives due to noise (will be settable in future)
• [All] Allow horizontally moving waveform after stopping acquisition (though no additional data is fetched from SmartScope yet)
• [Linux] Udev rules use plugdev group for smartscope device
• [All] Measurement box can be dragged away on any edge if pushed far enough
• [All] Ending a drag gesture only taps a button if the end of the gesture happend on that button
• [All] CSV storage doesn't crash app
• [All] CSV storage has excel "sep=" option on first line
• [OS X] resizing
• [All] Make sidemenu toggle instead of only open
• [All] Cheat sheet available from system menu
• [All] Quit available from system menu
• [All] False triggering should occurs far less
• [Linux] Shutdown problem