Changelog
Upcoming
- [All] Fix on zooming LA waves
- [All] Logic Analyser trigger fix
- wouldn't trigger when leaving scope mode triggering on ch B
- Hold off was incorrect
- [Android] In-app update for direct APK installs
- [All] Scope disconnect issue
- [All] Settings persistence
- [All] Switched to 8 vertical division instead of 10 to comply with traditional scopes
- [All] All types of zooming now have same max limit of 5V/div
- [All] Vertical offset cannot be set out of range anymore
- [All] Trigger level clipped to effective range
- [All] Indicator stickyness settable to major/minor/no ticks
- [All] Support AWG from CSV through dropbox
- [All] Probe scale factor correction
- [All] Frequency measurement improved (2 cycles is enough for a frequency detection)
- [All] Full usage of RAM / implemented overview timebar
- [Windows] Don't crash when device detection fails
- [All] Show state of trigger (armed/awaiting trigger)
- [All] Draw lines as lines, not using triangles, resulting in thinner yet better display
- [Windows][Mac][Linux] Use space bar to start/stop
- [Windows][Mac][Linux] Use 'V'-key to toggle timebar
- [Touch] Pinch gray area of timebar to resize
- [All] Doubletap/click timebar to hide, doubletap/click top graph border to show
- [All] Timebar better highlighting in dark mode
- [All] Correct viewport setting when acquisition buffer increased after acquisition was stopped
- [Windows][Mac][Linux] Use 'I' and 'O'-key to shrink/grow acquistion length
- [All] Correctly count data refresh rate (only count newly started acquisitions)
- [Windows][Mac][Linux] A/S/D set acquisition mode to Auto/Single/Normal
- [All] Inversed measurement box toggle button order
- [All] Don't show toggle button for unavailable measurement box
- [All] DummyScope trigger fix
- [All] Store channel coupling in settings
- [All] Measurement box hide/show and location storage fix
- [All] Added duty cycle measurement
- [All] Optimised waveform measuring
- [All] Setting to choose viewport behaviour when acquisition length is changed
- [All] Use F2/F3/F4 to toggle measurement boxes
- [All] Auto-update configurable and periodic (10 minutes)
- [All] Allow timescaling when no wave on grid
- [All] Better grid pinch / wave selection interaction
0.0.7.3
- [Mac] Fix USB init
- [All] Save settings
0.0.7.1
- [Windows] Resize bug fix
0.0.7.0
- [iOS] Device can be plugged after app started
- [All] Avoid crashing when accessing SmartScope while/after it's being unplugged
- [All] Fix crash sites due to IO thread changing UI
- [iOS] compute ppi
- [iOS] splash
- [iOS] No letterboxing on iPhone5+
- [All] Rolling mode enabled by default. When the time range is too large, don't try to trigger but stream data as it comes in
- [All] Trigger vertical threshold increased to lower false positives due to noise (will be settable in future)
- [All] Allow horizontally moving waveform after stopping acquisition (though no additional data is fetched from SmartScope yet)
- [Linux] Udev rules use plugdev group for smartscope device
- [All] Measurement box can be dragged away on any edge if pushed far enough
- [All] Ending a drag gesture only taps a button if the end of the gesture happend on that button
- [All] CSV storage doesn't crash app
- [All] CSV storage has excel "sep=" option on first line
- [OS X] resizing
- [All] Make sidemenu toggle instead of only open
- [All] Cheat sheet available from system menu
- [All] Quit available from system menu
- [All] False triggering should occurs far less
- [Linux] Shutdown problem