Digital Waveform Generator

NOTE: the current version of software (v0.0.8) does not yet support configuring the digital output channels automatically.

The SmartScope comes with 4 dedicated digital output channels, each capable of generating up to 100MS/s.
This allows square waves of up to 50MHz to be generated.

Output pin locations

The 4 output channels are located on the AUX port, at the back of the SmartScope.

Output voltage levels

As output voltage levels, you can select between 2 standards:

• 0V - 3.3V
• 0V - 5.0V

These voltages are selectable for an entire waveform and for all 4 channels together, not per sample nor per channel.