Suggestion box
Jump to navigation
Jump to search
Suggestions
Suggestion (software) | Origin |
---|---|
Get that External trigger pin going | [1] |
Documentation on USB protocol | sigrok |
Save decoder configuration | Alfons |
Save decoder configuration | [2] |
xth pulse triggering, pulse width triggering | [3] |
save contents of RAM to disk | [4] |
Cursors in FFT window. | [5] |
Record digital waveforms and reproduce them using digi-out | [6] |
possibility to give a name to the channels like "CLK, status, CE_N, ..." | [7] |
digi trigger through context menu | [8] |
save LA settings (trigger condition, arrangement of the channe) | [9] |
Re-arrange AWG menu | [10] |
save settings every minute or so | [11] |
Display measurements for digiwaves | [12] |
AWG defaulted to a DC offset of 0V, 3V P-P, and 1kHz so it can be used for probe comp | [13] |
Ensure lowest CPU consumption when acquisition is stopped | [14] |
X-Y mode | [15] |
Changing Colors for each channel would be a nice feature as well. | [16][17] |
itd be nice if there was a record setting for just one screens worth. | [18] |
what if we could customise the colours of grid, channels and background? | [19] |
ability to load the saved CSV and MAT files and view the waveform on the Smartscope GUI, so we can zoom in and out to the voltage and time scale | [20] |
independent analog channel triggering | [21] |
time based triggering to analog channels | [22] |
highlight the actual points taken (digitized) on the display waveform | [23] |
scroll on the mouse to cycle through the logic analyser trigger condition | [24] |
Hover+scroll wheel changes trigger options | [25] |
More complex trigger (hf reject etc) | [26] |
Android touch button equiv of page up/dn and home end: | [27] |
AWG takes HEX values rather than voltages | [28] |
Digital output linked to AWG waveform | [29] |
a package for the Raspberry Pi 2 running the default raspberry pi 2 Linux distribution | [30] |
Show AC/DC and trigger edge in bubble (same as x10) | [31] |
ability to turn off mousewheel | [32] |
Suggestion (hardware) | Origin |
---|---|
How about a nice fabric bag with a zipper, or better yet a clear one | [33] |
Suggestions which helped improving our app!
Suggestion | Origin |
---|---|
select max outliers to display on grid while subsampling on fpga | [34] |
"persistence" mode that would superimpose a number of traces on top of each other | [35] |
extend decoders so they can generate a new waveform | [36] |
Utra hi speed mode, trace acumulation, persistance | [37] |
Option to invert analogwaves/digiwaves | [38] [39] |
Make analog indicators docable the same way as the digital indicators are | [40] |
Make height of indivisual graphs adjustable by dragging center bar | [41] |
Option to 'unpower' AWG in analog mode | [42] |
Sliders: numeric pad for exact value input | [43] |
Show deltas of last 2 vertical and last 2 horizontal cursors | [44] |
flash single/require trigger while not receiving data | |
there would be value in having a "Power OK" light or indication, even if it's back through software, that acceptable power is present. | [45] |
allow 10ns/div | [46] |
key auto-repeat | [47] |
Right click or long press sets trigger to left 10% position | [48] |
UART decoder | [49] |
semi-automatic time measurement feature | [50] |
Would be nice to turn off channels not being used in the LA. | [51] |
Individual pins can't be hidden (as in o-scope) giving no screen space for the bus itself | [52] |
Suggestions we believed didn't really fit in our idea of a perfect SmartScope
Suggestion | Origin |
---|---|
Scaling: window popup with the "canonical" time base or volt per division value | [53] |
scroll causes voltage zoom, shift-scroll for time-zoom (opposite of today) | [54] |