Arbitrary Waveform Generator (AWG): Difference between revisions

From LabNation Wiki
Jump to navigation Jump to search
Line 18: Line 18:


#Generate a CSV file using the [[Media:awg_worksheet.xlsx|AWG excel worksheet]]. A sample CSV can be found for a [[Media:sine.csv|sine]] and [[Media:block.csv|block]] wave.
#Generate a CSV file using the [[Media:awg_worksheet.xlsx|AWG excel worksheet]]. A sample CSV can be found for a [[Media:sine.csv|sine]] and [[Media:block.csv|block]] wave.
#Drop your CSV file in the AWG folder (<dropbox>/Apps/LabNation SmartScope/AWG) using a file manager
#Drop your CSV file in the AWG folder (<dropbox>/'''Apps'''/LabNation SmartScope/AWG) using a file manager
#In the app, tap sidemenu > AWG > Upload from dropbox
#In the app, tap sidemenu > AWG > Upload from dropbox
#You should now be able to choose the CSV file
#You should now be able to choose the CSV file

Revision as of 09:00, 17 December 2014

The SmartScope has an Arbitraty waveform generator, capable of generating signals between the [0V, 3.3V] voltage range at a sample rate of 100MS/s.

AWG pin location

The signal generated by the AWG is presented on the 3rd-left pin on the bottom row of the AUX connector, as shown in the following image:
AWGoutput.png
Please keep in mind that you always should bridge 2 wires between 2 separate devices. In this case:

  • The AWG output signal
  • The ground, so both devices have the same reference voltage. (0V means the same on both devices)

In the image above, you can see the AWG pin is surrounded by 2 ground pins, either of which you can use to connect to the other device.

Configuring the AWG using pre-defined waves

Configuring the AWG using csv files

NOTE: This only works with a SmartScope connected. Otherwise, the sidemenu won't contain an AWG item If you haven't used dropbox with the SmartScope

  1. Tap sidemenu > AWG > Upload from dropbox
  2. The app will tell you it doesn't have permission to dropbox and ask for it by sending you off to the dropbox website
  3. Grant access and return to the app
  4. The app now creates the AWG folder and will inform you that this new folder is empty.


  1. Generate a CSV file using the AWG excel worksheet. A sample CSV can be found for a sine and block wave.
  2. Drop your CSV file in the AWG folder (<dropbox>/Apps/LabNation SmartScope/AWG) using a file manager
  3. In the app, tap sidemenu > AWG > Upload from dropbox
  4. You should now be able to choose the CSV file