Smartscope WiFi Bridge: Difference between revisions

From LabNation Wiki
Jump to navigation Jump to search
(Created page with "Note: the SmartScope WiFi Bridge is currently only available to a selected group of beta testers")
 
No edit summary
Line 1: Line 1:
Note: the SmartScope WiFi Bridge is currently only available to a selected group of beta testers
The battery-operated SmartScope WiFi Bridge allows you to power and use your SmartScope over a wireless or wired network connection.
Because the SmartScope WiFi Bridge includes a battery, all you need to do is connect your SmartScope to the WiFi bridge and you can use any tablet/phone/PC on the network to run the GUI!
The WiFi Bridge and client GUI both implement ZeroConf, which means that you don't need to input any IP address -- they will find each other automatically.
 
[need nice picture showing bridge+scope]
 
Current benefits of the SmartScope server:
 
* Allows to control a SmartScope from a (non-jailbroken) iPhone/iPad. Simply download the SmartScope app from the regular AppStore, and it will connect to a SmartScopeServer running in the network!
* Allows 9h+ of wireless connectivity to the SmartScope (full performance over WiFi)
* In case this would not be enough, you can charge the WiFi Bridge while it is operating
* Last but not least, you can use the SmartScope WiFi Brige as a standard USB battery pack to charge any USB device :)
 
Typical use-cases:
* Cases where a wired connection is just not that practical
* Leave your SmartScope at a test setup, and you can visualize the result from your chair
* ...
 
=Description=
[insert pic showing buttons]
* '''USB port: ''' this is where you connect the SmartScope
* '''Test button:''' pressing the 'T' button will show 0 to 4 LEDs, indicating the current charge on the internal battery
* '''Main switch:'''
** '''Left position '0':''' WiFi bridge is off. Use this for storing the device.
** '''Middle position 'C':''' WiFi bridge is acting as a charger. Connect any chargeable USB device to charge it. WiFi/CPU are disable to conserve energy.
** '''Right position 'R':''' Active mode, see below
* '''Micro-USB port:''' used for charging the internal battery
 
=Active mode=
When switched to Active mode, the LED will indicate following states:
* Solid Red: indicates CPU is starting
* Flasing Red: indicates the bridge is scanning for free WiFi channels, and is starting up the WiFi Access Point
* Purple: All set and ready to receive connection requests!
 
At this point, the bridge will have created a wireless network named SmartScope. Follow these remaining logical steps:
# Hook up a SmartScope to the USB port of the WiFi Bridge
# Connect any device to the SmartScope WiFi
# Start the SmartScope app on that device!

Revision as of 12:32, 21 June 2017

The battery-operated SmartScope WiFi Bridge allows you to power and use your SmartScope over a wireless or wired network connection. Because the SmartScope WiFi Bridge includes a battery, all you need to do is connect your SmartScope to the WiFi bridge and you can use any tablet/phone/PC on the network to run the GUI! The WiFi Bridge and client GUI both implement ZeroConf, which means that you don't need to input any IP address -- they will find each other automatically.

[need nice picture showing bridge+scope]

Current benefits of the SmartScope server:

  • Allows to control a SmartScope from a (non-jailbroken) iPhone/iPad. Simply download the SmartScope app from the regular AppStore, and it will connect to a SmartScopeServer running in the network!
  • Allows 9h+ of wireless connectivity to the SmartScope (full performance over WiFi)
  • In case this would not be enough, you can charge the WiFi Bridge while it is operating
  • Last but not least, you can use the SmartScope WiFi Brige as a standard USB battery pack to charge any USB device :)

Typical use-cases:

  • Cases where a wired connection is just not that practical
  • Leave your SmartScope at a test setup, and you can visualize the result from your chair
  • ...

Description

[insert pic showing buttons]

  • USB port: this is where you connect the SmartScope
  • Test button: pressing the 'T' button will show 0 to 4 LEDs, indicating the current charge on the internal battery
  • Main switch:
    • Left position '0': WiFi bridge is off. Use this for storing the device.
    • Middle position 'C': WiFi bridge is acting as a charger. Connect any chargeable USB device to charge it. WiFi/CPU are disable to conserve energy.
    • Right position 'R': Active mode, see below
  • Micro-USB port: used for charging the internal battery

Active mode

When switched to Active mode, the LED will indicate following states:

  • Solid Red: indicates CPU is starting
  • Flasing Red: indicates the bridge is scanning for free WiFi channels, and is starting up the WiFi Access Point
  • Purple: All set and ready to receive connection requests!

At this point, the bridge will have created a wireless network named SmartScope. Follow these remaining logical steps:

  1. Hook up a SmartScope to the USB port of the WiFi Bridge
  2. Connect any device to the SmartScope WiFi
  3. Start the SmartScope app on that device!