Suggestion box: Difference between revisions

From LabNation Wiki
Jump to navigation Jump to search
No edit summary
 
(66 intermediate revisions by the same user not shown)
Line 1: Line 1:
=Suggestions=
=Suggestions=
{| class="wikitable"
{| class="wikitable"
! Suggestion
! Suggestion (software)
! Origin
! Origin
|-
|-
| select max outliers to display on grid || [https://www.lab-nation.com/forum/software/topics/redraw-effect-when-stopping]
| Add pass-fail mask || [https://www.lab-nation.com/forum/software/topics/feature-request-pass-fail-wondow-for-testing-setups]
|-
| Separate size control for numbers on the grid || [https://www.lab-nation.com/forum/software/topics/readibilty-of-minus-signs-on-y-axis?page=1]
|-
| Don't switch to dummy scope when USB disconnected || [https://www.lab-nation.com/forum/software/topics/don-t-switch-to-dummy-scope-when-usb-disconnected]
|-
| Save to JSON format || [https://www.lab-nation.com/forum/software/topics/recording-i2c-or-any-other-decoded-logic-signals]
|-
| Select which channels to save to file || [https://www.lab-nation.com/forum/software/topics/recording-i2c-or-any-other-decoded-logic-signals]
|-
| Beep on trigger || [https://www.lab-nation.com/forum/smartscope-api/topics/trigger-beep]
|-
| Don't auto-change to Rolling mode || [https://www.lab-nation.com/forum/software/topics/stay-on-auto-triggering-while-switching-to-timebase-beyond-20ms-div]
|-
| Measurements also applicable to Math/Operator waves || [https://www.lab-nation.com/forum/software/topics/applying-measurements-of-math-graphs/posts/new?reply_to_id=3511]
|-
| FFT only on viewport (subsection of panorama) || [https://www.lab-nation.com/forum/software/topics/fft-display]
|-
| High-resolution multimeter mode (by changing offset voltage) || [https://www.lab-nation.com/forum/hardware/topics/measuring-resolution?page=1]
|-
| Data logger functionality || [https://www.lab-nation.com/forum/smartscope-api/topics/voltage-data-logger?page=1]
|-
| Possibility to switch off peak detect || Vainney
|-
| Average instead of peak detect || Vainney
|-
| Numpad: highlight value instead of removing it || Ger
|-
| Documentation on USB protocol || sigrok
|-
| After fetching RAM data: also update Panorama || sigrok
|-
| Remove sliders and replace by numpads || Karsten
|-
| Show preview of AWG function to upload || Karsten
|-
| Save - replay functionality || Robert
|-
| Add ESC button to keyboard || Harry
|-
| high-time, low-time measurement || Seb
|-
| Frequency response tool || [https://www.lab-nation.com/forum/software/topics/new-feature-suggestion-frequency-response-tool?page=1]
|-
| Android keyboard support || [https://www.lab-nation.com/forum/software/topics/smartscope-and-odroid?page=1]
|-
| In-app decoder output listing || [https://www.lab-nation.com/forum/software/topics/suggestions-decoder-trigger-mode-and-data-listing/posts/new?reply_to_id=1891]
|-
| On adding decoder: suggest to switch to require trigger or single trigger mode || [https://www.lab-nation.com/forum/software/topics/i-c-decoder-doesn-t-decode-when-it-samples-below-50mhz/posts/new?reply_to_id=1986]
|-
| Cursors in FFT window. || [https://www.lab-nation.com/forum/software/topics/version-2015-1001-0-50-linux-issue-wishes?page=1][https://www.lab-nation.com/forum/software/topics/using-the-fft-graph?page=1]
|-
| Record digital waveforms and reproduce them using digi-out || [https://www.lab-nation.com/forum/software/topics/logic-analyzer-like-saleae]
|-
| Mac users - keyboard and mouse || [https://www.lab-nation.com/forum/software/topics/mac-users-keyboard-and-mouse?page=1]
|-
|-
| X-Y mode || [https://www.lab-nation.com/forum/hardware/topics/does-it-support-xy-mode]
| possibility to give a name to the channels like "CLK, status, CE_N, ..." || [https://www.lab-nation.com/forum/software/topics/questions-and-suggestions-to-the-logic-analyzer/posts/new?reply_to_id=1794]
|-
| digi trigger through context menu || [https://www.lab-nation.com/forum/software/topics/questions-and-suggestions-to-the-logic-analyzer/posts/new?reply_to_id=1794]
|-
|-
| Changing Colors for each channel would be a nice feature as well. || [https://www.lab-nation.com/forum/software/topics/mac-os-crashes-ui-suggestions/posts/new?reply_to_id=682][https://www.lab-nation.com/forum/software/topics/how-do-we-adjust-vert-sensitivity-in-the-linux-version/posts/new?reply_to_id=738]
| Re-arrange AWG menu || [https://www.lab-nation.com/forum/software/topics/turn-on-off-awg]
|-
|-
| itd be nice if there was a record setting for just one screens worth. || [https://www.lab-nation.com/forum/software/topics/how-do-we-adjust-vert-sensitivity-in-the-linux-version/posts/new?reply_to_id=738]
| Display measurements for digiwaves || [https://www.lab-nation.com/forum/software/topics/math-decoders-issues-bugs]
|-
|-
| what if we could customise the colours of grid, channels and background? || [https://www.lab-nation.com/forum/hardware/topics/questions-and-suggestions/posts/new?reply_to_id=791]
| AWG defaulted to a DC offset of 0V, 3V P-P, and 1kHz so it can be used for probe comp || [https://www.lab-nation.com/forum/software/topics/2015-1002-10-58-mac-os-x-numpad-is-transparent?page=1]
|-
|-
| ability to load the saved CSV and MAT files and view the waveform on the Smartscope GUI, so we can zoom in and out to the voltage and time scale || [https://www.lab-nation.com/forum/hardware/topics/questions-and-suggestions/posts/new?reply_to_id=791]
| Ensure lowest CPU consumption when acquisition is stopped || [https://www.lab-nation.com/forum/software/topics/smartscope-sw-draws-a-lot-of-current-power-on-an-android-device-even-when-not-in-use/posts/new?reply_to_id=1733]
|-
|-
| independent analog channel triggering || [https://www.lab-nation.com/forum/hardware/topics/questions-and-suggestions/posts/new?reply_to_id=821]
| Changing Colors for each channel would be a nice feature as well. || [https://www.lab-nation.com/forum/software/topics/mac-os-crashes-ui-suggestions/posts/new?reply_to_id=682][https://www.lab-nation.com/forum/software/topics/how-do-we-adjust-vert-sensitivity-in-the-linux-version/posts/new?reply_to_id=738][https://www.lab-nation.com/forum/software/topics/change-trace-colors-for-high-contrast-prints]
|-
|-
| allow 10ns/div || [https://www.lab-nation.com/forum/software/topics/my-first-run-experiences-cb30bb0f-ac41-4848-a6db-cdd53867a022/posts/new?reply_to_id=826]
| what if we could customise the colours of grid, channels and background? || [https://www.lab-nation.com/forum/hardware/topics/questions-and-suggestions/posts/new?reply_to_id=791]
|-
|-
| time based triggering to analog channels || [https://www.lab-nation.com/forum/hardware/topics/questions-and-suggestions?page=1]
| ability to load the saved CSV and MAT files and view the waveform on the Smartscope GUI, so we can zoom in and out to the voltage and time scale || [https://www.lab-nation.com/forum/hardware/topics/questions-and-suggestions/posts/new?reply_to_id=791]
|-
|-
| highlight the actual points taken (digitized) on the display waveform || [https://www.lab-nation.com/forum/hardware/topics/point-enhancement-mode]
| highlight the actual points taken (digitized) on the display waveform || [https://www.lab-nation.com/forum/hardware/topics/point-enhancement-mode]
|-
|-
| scroll on the mouse to cycle through the logic analyser trigger condition|| [https://www.lab-nation.com/forum/software/topics/new-user-questions-and-maybe-suggestions?page=1]
| scroll on the mouse to cycle through the logic analyser trigger condition|| [https://www.lab-nation.com/forum/software/topics/new-user-questions-and-maybe-suggestions?page=1]
|-
| "persistence" mode that would superimpose a number of traces on top of each other|| [https://www.lab-nation.com/forum/software/topics/feature-suggestion]
|-
|-
| Hover+scroll wheel changes trigger options|| [https://www.lab-nation.com/forum/software/topics/a-long-list-of-software-suggestions]
| Hover+scroll wheel changes trigger options|| [https://www.lab-nation.com/forum/software/topics/a-long-list-of-software-suggestions]
|-
| Utra hi speed mode, trace acumulation, persistance|| [https://www.lab-nation.com/forum/software/topics/a-long-list-of-software-suggestions]
|-
| More complex trigger (hf reject etc)|| [https://www.lab-nation.com/forum/software/topics/a-long-list-of-software-suggestions]
|-
|-
| Android touch button equiv of page up/dn and home end:|| [https://www.lab-nation.com/forum/software/topics/a-long-list-of-software-suggestions]
| Android touch button equiv of page up/dn and home end:|| [https://www.lab-nation.com/forum/software/topics/a-long-list-of-software-suggestions]
Line 41: Line 91:
|-
|-
| a package for the Raspberry Pi 2 running the default raspberry pi 2 Linux distribution|| [https://www.lab-nation.com/forum/software/topics/raspberry-pi-2-support/posts/new?reply_to_id=1273]
| a package for the Raspberry Pi 2 running the default raspberry pi 2 Linux distribution|| [https://www.lab-nation.com/forum/software/topics/raspberry-pi-2-support/posts/new?reply_to_id=1273]
|-
| convert Operator wave into reference wave || [https://www.lab-nation.com/forum/software/topics/peak-detect-switch-on-and-off]
|-
|-
| Show AC/DC and trigger edge in bubble (same as x10) || [https://www.lab-nation.com/forum/software/topics/a-long-list-of-software-suggestions/posts/new?reply_to_id=1388]
| Show AC/DC and trigger edge in bubble (same as x10) || [https://www.lab-nation.com/forum/software/topics/a-long-list-of-software-suggestions/posts/new?reply_to_id=1388]
|-
|-
| extend decoders so they can generate a new waveform || [https://www.lab-nation.com/forum/software/topics/custom-math?page=1]
| ability to turn off mousewheel || [https://www.lab-nation.com/forum/software/topics/einstellung-per-mausrad]
|-
| ping-pong memory architecture || [https://www.lab-nation.com/forum/software/topics/panorama-shows-waveform-main-window-shows-nothing]
|-
| duplex 4wire SPI output || [https://www.lab-nation.com/forum/software/topics/decoder-4-wire-spi?page=1]
|-
| mode: fix trigger position || [https://www.lab-nation.com/forum/software/topics/feature-suggestion-fixed-trigger-position?page=1]
|-
| measurement: low and high period time || [Mail Tom]
|-
| trigger counter || [https://www.lab-nation.com/forum/software/topics/triggering-seriously-needs-improvement-in-features?page=1]
|}
 
{| class="wikitable"
! Suggestion (hardware)
! Origin
|-
|-
| ability to turn off mousewheel || [https://www.lab-nation.com/forum/software/topics/einstellung-per-mausrad]
| How about a nice fabric bag with a zipper, or better yet a clear one || [https://www.lab-nation.com/forum/hardware/topics/recommendations/posts/new?reply_to_id=1751]
|}
|}


Line 53: Line 120:
! Suggestion
! Suggestion
! Origin
! Origin
|-
| Save decoder configuration || [https://www.lab-nation.com/forum/software/topics/suggestion-protocol-decoder-save-settings]
|-
| Save and recall entire configuration || [https://www.lab-nation.com/forum/software/topics/suggestion-protocol-decoder-save-settings]
|-
| save LA settings (trigger condition, arrangement of the channe) || [https://www.lab-nation.com/forum/software/topics/questions-and-suggestions-to-the-logic-analyzer/posts/new?reply_to_id=1794]
|-
| Support for current probes || [https://www.lab-nation.com/forum/software/topics/when-are-you-going-to-add-presets-for-inductive-amp-clamps-into-the-probe-selection-menu]
|-
| Support for 20x attenuators || Vainney
|-
| Edge counter between cursors || Vainney
|-
| save settings every minute or so || [https://www.lab-nation.com/forum/software/topics/software-state-storage?page=1]
|-
| X-Y mode || [https://www.lab-nation.com/forum/hardware/topics/does-it-support-xy-mode]
|-
| Reference waveform || [https://www.lab-nation.com/forum/software/topics/display-reference-waveform?page=1]
|-
| I2C decoder: show W/R in address block || Yentel
|-
| Need better FFT pan/zoom support || [https://www.lab-nation.com/forum/software/topics/using-the-fft-graph]
|-
| Get that External trigger pin going || [https://www.lab-nation.com/forum/hardware/topics/external-trigger]
|-
| xth pulse triggering, pulse width triggering || [https://www.lab-nation.com/forum/software/topics/trigger-every-2nd-or-3rd-pulse?page=1]
|-
| independent analog channel triggering || [https://www.lab-nation.com/forum/hardware/topics/questions-and-suggestions/posts/new?reply_to_id=821]
|-
| time based triggering to analog channels || [https://www.lab-nation.com/forum/hardware/topics/questions-and-suggestions?page=1]
|-
| More complex trigger (hf reject etc)|| [https://www.lab-nation.com/forum/software/topics/a-long-list-of-software-suggestions]
|-
| save contents of RAM to disk || [https://www.lab-nation.com/forum/hardware/topics/how-to-acquire-long-data-set?page=1]
|-
| itd be nice if there was a record setting for just one screens worth. || [https://www.lab-nation.com/forum/software/topics/how-do-we-adjust-vert-sensitivity-in-the-linux-version/posts/new?reply_to_id=738]
|-
| select max outliers to display on grid  while subsampling on fpga|| [https://www.lab-nation.com/forum/software/topics/redraw-effect-when-stopping]
|-
| "persistence" mode that would superimpose a number of traces on top of each other|| [https://www.lab-nation.com/forum/software/topics/feature-suggestion]
|-
| extend decoders so they can generate a new waveform || [https://www.lab-nation.com/forum/software/topics/custom-math?page=1]
|-
| Improve cursor contrast || [https://www.lab-nation.com/forum/software/topics/cursors-are-hardly-visible?page=1]
|-
| Utra hi speed mode, trace acumulation, persistance|| [https://www.lab-nation.com/forum/software/topics/a-long-list-of-software-suggestions]
|-
| Option to invert analogwaves/digiwaves|| [https://www.lab-nation.com/forum/software/topics/math-decoders-issues-bugs] [https://www.lab-nation.com/forum/software/topics/option-to-invert-trace]
|-
| Make analog indicators docable the same way as the digital indicators are || [https://www.lab-nation.com/forum/software/topics/math-decoders-issues-bugs]
|-
| Make height of indivisual graphs adjustable by dragging center bar || [https://www.lab-nation.com/forum/smartscope-api/topics/some-wishes-to-smartscope]
|-
| Option to 'unpower' AWG in analog mode|| [https://www.lab-nation.com/forum/software/topics/turn-on-off-awg?page=1]
|-
|-
| Sliders: numeric pad for exact value input || [https://www.lab-nation.com/forum/software/topics/software-comments]
| Sliders: numeric pad for exact value input || [https://www.lab-nation.com/forum/software/topics/software-comments]
Line 61: Line 182:
|-
|-
| there would be value in having a "Power OK" light or indication, even if it's back through software, that acceptable power is present. || [https://www.lab-nation.com/forum/hardware/topics/question-about-power-supplying-to-smartscope-and-android-tablet]
| there would be value in having a "Power OK" light or indication, even if it's back through software, that acceptable power is present. || [https://www.lab-nation.com/forum/hardware/topics/question-about-power-supplying-to-smartscope-and-android-tablet]
|-
| allow 10ns/div || [https://www.lab-nation.com/forum/software/topics/my-first-run-experiences-cb30bb0f-ac41-4848-a6db-cdd53867a022/posts/new?reply_to_id=826]
|-
|-
| key auto-repeat || [https://www.lab-nation.com/forum/software/topics/my-first-run-experiences-cb30bb0f-ac41-4848-a6db-cdd53867a022/posts/new?reply_to_id=826]
| key auto-repeat || [https://www.lab-nation.com/forum/software/topics/my-first-run-experiences-cb30bb0f-ac41-4848-a6db-cdd53867a022/posts/new?reply_to_id=826]
Line 71: Line 194:
|-
|-
| Would be nice to turn off channels not being used in the LA. || [https://www.lab-nation.com/forum/software/topics/mac-os-crashes-ui-suggestions/posts/new?reply_to_id=682]
| Would be nice to turn off channels not being used in the LA. || [https://www.lab-nation.com/forum/software/topics/mac-os-crashes-ui-suggestions/posts/new?reply_to_id=682]
|-
| Sample on how to control digital outputs from Matlab || Jacobus
|-
|-
| Individual pins can't be hidden (as in o-scope) giving no screen space for the bus itself || [https://www.lab-nation.com/forum/software/topics/viewing-issues-using-logic-analyzer-as-a-bus/posts/new?reply_to_id=746]
| Individual pins can't be hidden (as in o-scope) giving no screen space for the bus itself || [https://www.lab-nation.com/forum/software/topics/viewing-issues-using-logic-analyzer-as-a-bus/posts/new?reply_to_id=746]

Latest revision as of 18:52, 3 April 2019

Suggestions

Suggestion (software) Origin
Add pass-fail mask [1]
Separate size control for numbers on the grid [2]
Don't switch to dummy scope when USB disconnected [3]
Save to JSON format [4]
Select which channels to save to file [5]
Beep on trigger [6]
Don't auto-change to Rolling mode [7]
Measurements also applicable to Math/Operator waves [8]
FFT only on viewport (subsection of panorama) [9]
High-resolution multimeter mode (by changing offset voltage) [10]
Data logger functionality [11]
Possibility to switch off peak detect Vainney
Average instead of peak detect Vainney
Numpad: highlight value instead of removing it Ger
Documentation on USB protocol sigrok
After fetching RAM data: also update Panorama sigrok
Remove sliders and replace by numpads Karsten
Show preview of AWG function to upload Karsten
Save - replay functionality Robert
Add ESC button to keyboard Harry
high-time, low-time measurement Seb
Frequency response tool [12]
Android keyboard support [13]
In-app decoder output listing [14]
On adding decoder: suggest to switch to require trigger or single trigger mode [15]
Cursors in FFT window. [16][17]
Record digital waveforms and reproduce them using digi-out [18]
Mac users - keyboard and mouse [19]
possibility to give a name to the channels like "CLK, status, CE_N, ..." [20]
digi trigger through context menu [21]
Re-arrange AWG menu [22]
Display measurements for digiwaves [23]
AWG defaulted to a DC offset of 0V, 3V P-P, and 1kHz so it can be used for probe comp [24]
Ensure lowest CPU consumption when acquisition is stopped [25]
Changing Colors for each channel would be a nice feature as well. [26][27][28]
what if we could customise the colours of grid, channels and background? [29]
ability to load the saved CSV and MAT files and view the waveform on the Smartscope GUI, so we can zoom in and out to the voltage and time scale [30]
highlight the actual points taken (digitized) on the display waveform [31]
scroll on the mouse to cycle through the logic analyser trigger condition [32]
Hover+scroll wheel changes trigger options [33]
Android touch button equiv of page up/dn and home end: [34]
AWG takes HEX values rather than voltages [35]
Digital output linked to AWG waveform [36]
a package for the Raspberry Pi 2 running the default raspberry pi 2 Linux distribution [37]
convert Operator wave into reference wave [38]
Show AC/DC and trigger edge in bubble (same as x10) [39]
ability to turn off mousewheel [40]
ping-pong memory architecture [41]
duplex 4wire SPI output [42]
mode: fix trigger position [43]
measurement: low and high period time [Mail Tom]
trigger counter [44]
Suggestion (hardware) Origin
How about a nice fabric bag with a zipper, or better yet a clear one [45]

Suggestions which helped improving our app!

Suggestion Origin
Save decoder configuration [46]
Save and recall entire configuration [47]
save LA settings (trigger condition, arrangement of the channe) [48]
Support for current probes [49]
Support for 20x attenuators Vainney
Edge counter between cursors Vainney
save settings every minute or so [50]
X-Y mode [51]
Reference waveform [52]
I2C decoder: show W/R in address block Yentel
Need better FFT pan/zoom support [53]
Get that External trigger pin going [54]
xth pulse triggering, pulse width triggering [55]
independent analog channel triggering [56]
time based triggering to analog channels [57]
More complex trigger (hf reject etc) [58]
save contents of RAM to disk [59]
itd be nice if there was a record setting for just one screens worth. [60]
select max outliers to display on grid while subsampling on fpga [61]
"persistence" mode that would superimpose a number of traces on top of each other [62]
extend decoders so they can generate a new waveform [63]
Improve cursor contrast [64]
Utra hi speed mode, trace acumulation, persistance [65]
Option to invert analogwaves/digiwaves [66] [67]
Make analog indicators docable the same way as the digital indicators are [68]
Make height of indivisual graphs adjustable by dragging center bar [69]
Option to 'unpower' AWG in analog mode [70]
Sliders: numeric pad for exact value input [71]
Show deltas of last 2 vertical and last 2 horizontal cursors [72]
flash single/require trigger while not receiving data
there would be value in having a "Power OK" light or indication, even if it's back through software, that acceptable power is present. [73]
allow 10ns/div [74]
key auto-repeat [75]
Right click or long press sets trigger to left 10% position [76]
UART decoder [77]
semi-automatic time measurement feature [78]
Would be nice to turn off channels not being used in the LA. [79]
Sample on how to control digital outputs from Matlab Jacobus
Individual pins can't be hidden (as in o-scope) giving no screen space for the bus itself [80]

Suggestions we believed didn't really fit in our idea of a perfect SmartScope

Suggestion Origin
Scaling: window popup with the "canonical" time base or volt per division value [81]
scroll causes voltage zoom, shift-scroll for time-zoom (opposite of today) [82]