Suggestion box: Difference between revisions

From LabNation Wiki
Jump to navigation Jump to search
Line 34: Line 34:
| On adding decoder: suggest to switch to require trigger or single trigger mode || [https://www.lab-nation.com/forum/software/topics/i-c-decoder-doesn-t-decode-when-it-samples-below-50mhz/posts/new?reply_to_id=1986]
| On adding decoder: suggest to switch to require trigger or single trigger mode || [https://www.lab-nation.com/forum/software/topics/i-c-decoder-doesn-t-decode-when-it-samples-below-50mhz/posts/new?reply_to_id=1986]
|-
|-
| Cursors, zooming in FFT window. || [https://www.lab-nation.com/forum/software/topics/version-2015-1001-0-50-linux-issue-wishes?page=1][https://www.lab-nation.com/forum/software/topics/using-the-fft-graph?page=1]https://www.lab-nation.com/forum/software/topics/using-the-fft-graph?page=1
| Cursors, zooming in FFT window. || [https://www.lab-nation.com/forum/software/topics/version-2015-1001-0-50-linux-issue-wishes?page=1][https://www.lab-nation.com/forum/software/topics/using-the-fft-graph?page=1]https://www.lab-nation.com/forum/software/topics/using-the-fft-graph?page=1]
|-
|-
| Record digital waveforms and reproduce them using digi-out || [https://www.lab-nation.com/forum/software/topics/logic-analyzer-like-saleae]
| Record digital waveforms and reproduce them using digi-out || [https://www.lab-nation.com/forum/software/topics/logic-analyzer-like-saleae]

Revision as of 08:52, 7 July 2016

Suggestions

Suggestion (software) Origin
Data logger functionality [1]
Edge counter between cursors Vainney
Sample on how to control digital outputs from Matlab Jacobus
Numpad: highlight value instead of removing it Ger
Documentation on USB protocol sigrok
Save decoder configuration Alfons
I2C decoder: show W/R in address block Yentel
Remove sliders and replace by numpads Karsten
Show preview of AWG function to upload Karsten
Save - replay functionality Robert
Frequency response tool [2]
Android keyboard support [3]
In-app decoder output listing [4]
Reference waveform [5]
On adding decoder: suggest to switch to require trigger or single trigger mode [6]
Cursors, zooming in FFT window. [7][8]https://www.lab-nation.com/forum/software/topics/using-the-fft-graph?page=1]
Record digital waveforms and reproduce them using digi-out [9]
Mac users - keyboard and mouse [10]
possibility to give a name to the channels like "CLK, status, CE_N, ..." [11]
digi trigger through context menu [12]
save LA settings (trigger condition, arrangement of the channe) [13]
Re-arrange AWG menu [14]
save settings every minute or so [15]
Display measurements for digiwaves [16]
AWG defaulted to a DC offset of 0V, 3V P-P, and 1kHz so it can be used for probe comp [17]
Ensure lowest CPU consumption when acquisition is stopped [18]
X-Y mode [19]
Changing Colors for each channel would be a nice feature as well. [20][21]
what if we could customise the colours of grid, channels and background? [22]
ability to load the saved CSV and MAT files and view the waveform on the Smartscope GUI, so we can zoom in and out to the voltage and time scale [23]
highlight the actual points taken (digitized) on the display waveform [24]
scroll on the mouse to cycle through the logic analyser trigger condition [25]
Hover+scroll wheel changes trigger options [26]
Android touch button equiv of page up/dn and home end: [27]
AWG takes HEX values rather than voltages [28]
Digital output linked to AWG waveform [29]
a package for the Raspberry Pi 2 running the default raspberry pi 2 Linux distribution [30]
Show AC/DC and trigger edge in bubble (same as x10) [31]
ability to turn off mousewheel [32]
ping-pong memory architecture [33]
duplex 4wire SPI output [34]
mode: fix trigger position [35]
trigger counter [36]
Suggestion (hardware) Origin
How about a nice fabric bag with a zipper, or better yet a clear one [37]

Suggestions which helped improving our app!

Suggestion Origin
Get that External trigger pin going [38]
xth pulse triggering, pulse width triggering [39]
independent analog channel triggering [40]
time based triggering to analog channels [41]
More complex trigger (hf reject etc) [42]
save contents of RAM to disk [43]
itd be nice if there was a record setting for just one screens worth. [44]
select max outliers to display on grid while subsampling on fpga [45]
"persistence" mode that would superimpose a number of traces on top of each other [46]
extend decoders so they can generate a new waveform [47]
Improve cursor contrast [48]
Utra hi speed mode, trace acumulation, persistance [49]
Option to invert analogwaves/digiwaves [50] [51]
Make analog indicators docable the same way as the digital indicators are [52]
Make height of indivisual graphs adjustable by dragging center bar [53]
Option to 'unpower' AWG in analog mode [54]
Sliders: numeric pad for exact value input [55]
Show deltas of last 2 vertical and last 2 horizontal cursors [56]
flash single/require trigger while not receiving data
there would be value in having a "Power OK" light or indication, even if it's back through software, that acceptable power is present. [57]
allow 10ns/div [58]
key auto-repeat [59]
Right click or long press sets trigger to left 10% position [60]
UART decoder [61]
semi-automatic time measurement feature [62]
Would be nice to turn off channels not being used in the LA. [63]
Individual pins can't be hidden (as in o-scope) giving no screen space for the bus itself [64]

Suggestions we believed didn't really fit in our idea of a perfect SmartScope

Suggestion Origin
Scaling: window popup with the "canonical" time base or volt per division value [65]
scroll causes voltage zoom, shift-scroll for time-zoom (opposite of today) [66]