| Suggestion (software)
|
Origin
|
| Get that External trigger pin going |
[1]
|
| Documentation on USB protocol |
sigrok
|
| xth pulse triggering, pulse width triggering |
[2]
|
| Cursors in FFT window. |
[3]
|
| Record digital waveforms and reproduce them using digi-out |
[4]
|
| possibility to give a name to the channels like "CLK, status, CE_N, ..." |
[5]
|
| digi trigger through context menu |
[6]
|
| save LA settings (trigger condition, arrangement of the channe) |
[7]
|
| Re-arrange AWG menu |
[8]
|
| save settings every minute or so |
[9]
|
| Display measurements for digiwaves |
[10]
|
| AWG defaulted to a DC offset of 0V, 3V P-P, and 1kHz so it can be used for probe comp |
[11]
|
| Ensure lowest CPU consumption when acquisition is stopped |
[12]
|
| X-Y mode |
[13]
|
| Changing Colors for each channel would be a nice feature as well. |
[14][15]
|
| itd be nice if there was a record setting for just one screens worth. |
[16]
|
| what if we could customise the colours of grid, channels and background? |
[17]
|
| ability to load the saved CSV and MAT files and view the waveform on the Smartscope GUI, so we can zoom in and out to the voltage and time scale |
[18]
|
| independent analog channel triggering |
[19]
|
| time based triggering to analog channels |
[20]
|
| highlight the actual points taken (digitized) on the display waveform |
[21]
|
| scroll on the mouse to cycle through the logic analyser trigger condition |
[22]
|
| Hover+scroll wheel changes trigger options |
[23]
|
| More complex trigger (hf reject etc) |
[24]
|
| Android touch button equiv of page up/dn and home end: |
[25]
|
| AWG takes HEX values rather than voltages |
[26]
|
| Digital output linked to AWG waveform |
[27]
|
| a package for the Raspberry Pi 2 running the default raspberry pi 2 Linux distribution |
[28]
|
| Show AC/DC and trigger edge in bubble (same as x10) |
[29]
|
| extend decoders so they can generate a new waveform |
[30]
|
| ability to turn off mousewheel |
[31]
|