Suggestion box

From LabNation Wiki
Jump to navigation Jump to search

Suggestions

Suggestion (software) Origin
Data logger functionality [1]
Need better FFT pan/zoom support [2]
Edge counter between cursors Vainney
Sample on how to control digital outputs from Matlab Jacobus
Numpad: highlight value instead of removing it Ger
Documentation on USB protocol sigrok
Save decoder configuration Alfons
I2C decoder: show W/R in address block Yentel
Remove sliders and replace by numpads Karsten
Show preview of AWG function to upload Karsten
Save - replay functionality Robert
Frequency response tool [3]
Android keyboard support [4]
In-app decoder output listing [5]
Reference waveform [6]
On adding decoder: suggest to switch to require trigger or single trigger mode [7]
Cursors, zooming in FFT window. [8][9]
Record digital waveforms and reproduce them using digi-out [10]
Mac users - keyboard and mouse [11]
possibility to give a name to the channels like "CLK, status, CE_N, ..." [12]
digi trigger through context menu [13]
save LA settings (trigger condition, arrangement of the channe) [14]
Re-arrange AWG menu [15]
save settings every minute or so [16]
Display measurements for digiwaves [17]
AWG defaulted to a DC offset of 0V, 3V P-P, and 1kHz so it can be used for probe comp [18]
Ensure lowest CPU consumption when acquisition is stopped [19]
X-Y mode [20]
Changing Colors for each channel would be a nice feature as well. [21][22]
what if we could customise the colours of grid, channels and background? [23]
ability to load the saved CSV and MAT files and view the waveform on the Smartscope GUI, so we can zoom in and out to the voltage and time scale [24]
highlight the actual points taken (digitized) on the display waveform [25]
scroll on the mouse to cycle through the logic analyser trigger condition [26]
Hover+scroll wheel changes trigger options [27]
Android touch button equiv of page up/dn and home end: [28]
AWG takes HEX values rather than voltages [29]
Digital output linked to AWG waveform [30]
a package for the Raspberry Pi 2 running the default raspberry pi 2 Linux distribution [31]
Show AC/DC and trigger edge in bubble (same as x10) [32]
ability to turn off mousewheel [33]
ping-pong memory architecture [34]
duplex 4wire SPI output [35]
mode: fix trigger position [36]
trigger counter [37]
Suggestion (hardware) Origin
How about a nice fabric bag with a zipper, or better yet a clear one [38]

Suggestions which helped improving our app!

Suggestion Origin
Get that External trigger pin going [39]
xth pulse triggering, pulse width triggering [40]
independent analog channel triggering [41]
time based triggering to analog channels [42]
More complex trigger (hf reject etc) [43]
save contents of RAM to disk [44]
itd be nice if there was a record setting for just one screens worth. [45]
select max outliers to display on grid while subsampling on fpga [46]
"persistence" mode that would superimpose a number of traces on top of each other [47]
extend decoders so they can generate a new waveform [48]
Improve cursor contrast [49]
Utra hi speed mode, trace acumulation, persistance [50]
Option to invert analogwaves/digiwaves [51] [52]
Make analog indicators docable the same way as the digital indicators are [53]
Make height of indivisual graphs adjustable by dragging center bar [54]
Option to 'unpower' AWG in analog mode [55]
Sliders: numeric pad for exact value input [56]
Show deltas of last 2 vertical and last 2 horizontal cursors [57]
flash single/require trigger while not receiving data
there would be value in having a "Power OK" light or indication, even if it's back through software, that acceptable power is present. [58]
allow 10ns/div [59]
key auto-repeat [60]
Right click or long press sets trigger to left 10% position [61]
UART decoder [62]
semi-automatic time measurement feature [63]
Would be nice to turn off channels not being used in the LA. [64]
Individual pins can't be hidden (as in o-scope) giving no screen space for the bus itself [65]

Suggestions we believed didn't really fit in our idea of a perfect SmartScope

Suggestion Origin
Scaling: window popup with the "canonical" time base or volt per division value [66]
scroll causes voltage zoom, shift-scroll for time-zoom (opposite of today) [67]