Suggestion box

From LabNation Wiki
Revision as of 07:48, 30 September 2015 by Riemerg (talk | contribs)
Jump to navigation Jump to search

Suggestions

Suggestion Origin
Get that External trigger pin going [1]
Ensure lowest CPU consumption when acquisition is stopped [2]
Option to invert analogwaves/digiwaves [3] [4]
select max outliers to display on grid while subsampling on fpga [5]
X-Y mode [6]
Changing Colors for each channel would be a nice feature as well. [7][8]
itd be nice if there was a record setting for just one screens worth. [9]
what if we could customise the colours of grid, channels and background? [10]
ability to load the saved CSV and MAT files and view the waveform on the Smartscope GUI, so we can zoom in and out to the voltage and time scale [11]
independent analog channel triggering [12]
allow 10ns/div [13]
time based triggering to analog channels [14]
highlight the actual points taken (digitized) on the display waveform [15]
scroll on the mouse to cycle through the logic analyser trigger condition [16]
"persistence" mode that would superimpose a number of traces on top of each other [17]
Hover+scroll wheel changes trigger options [18]
Utra hi speed mode, trace acumulation, persistance [19]
More complex trigger (hf reject etc) [20]
Android touch button equiv of page up/dn and home end: [21]
AWG takes HEX values rather than voltages [22]
Digital output linked to AWG waveform [23]
a package for the Raspberry Pi 2 running the default raspberry pi 2 Linux distribution [24]
Show AC/DC and trigger edge in bubble (same as x10) [25]
extend decoders so they can generate a new waveform [26]
ability to turn off mousewheel [27]

Suggestions which helped improving our app!

Suggestion Origin
Make height of indivisual graphs adjustable by dragging center bar [28]
Option to 'unpower' AWG in analog mode [29]
Sliders: numeric pad for exact value input [30]
Show deltas of last 2 vertical and last 2 horizontal cursors [31]
flash single/require trigger while not receiving data
there would be value in having a "Power OK" light or indication, even if it's back through software, that acceptable power is present. [32]
key auto-repeat [33]
Right click or long press sets trigger to left 10% position [34]
UART decoder [35]
semi-automatic time measurement feature [36]
Would be nice to turn off channels not being used in the LA. [37]
Individual pins can't be hidden (as in o-scope) giving no screen space for the bus itself [38]

Suggestions we believed didn't really fit in our idea of a perfect SmartScope

Suggestion Origin
Scaling: window popup with the "canonical" time base or volt per division value [39]
scroll causes voltage zoom, shift-scroll for time-zoom (opposite of today) [40]